STBVP6-RB1E02 BANNER ENGINEERING, STBVP6-RB1E02 Datasheet - Page 5

• Manufacturer Part Number: STBVP6-RB1E02
• Description: Safety; Duo-Touch; Run Bar System; LED Indicator; 2 NC Safety Contacts
• Manufacturer: BANNER ENGINEERING

Specifications of STBVP6-RB1E02

• Function: Proximity
• Primary Type: Photoelectric
• Sensing Mode: Through-Beam
• Technology: Photoelectric

Figure 1. Run Bar location
See Elbow
Height Table
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: [phone]
Separation Distance (D
s
)
±30°
Mechanical Installation
Mount the DUO-TOUCH Run Bar in a way that maximizes its ergonomic design and
minimizes the possibility of defeat. To minimize the possibility of defeat, ISO 13851
(EN 574) recommends that the hand controls be arranged on a horizontal (or nearly
horizontal) surface, 1100 mm (43.3") above the floor. The Run Bar makes this installation
easy.
To maximize ergonomics, ANSI B11.TR1 recommends that for light to normal work the
position should be 50 to 100 mm (2" to 4") above or below elbow height. Elbow height
should be determined and adjusted for each individual operator. Anthropometric tables
provide a range for guidance (see ANSI B11.TR1 Annex A):
Tilting the run bar (using the bracket’s multiple-hole adjustment) can allow for varying
operator heights, while maintaining a neutral wrist position. This rotation should not
exceed ±30º, especially when an emergency stop button is mounted on the top of the run
bar. Hand and wrist posture is considered to be neutral when the hand is neither flexed
nor extended beyond about 15º of the normally relaxed position.
Per ANSI B11.TR1, the most desirable location for controls used by a standing operator is
a position directly in front of the operator, and at a height between chest and waist level.
Frequent reaches should nominally be made within 350 to 450 mm (14" to 18") from the
center of the shoulder to the run bar. Only occasional reaches should be made within 550
to 650 mm (22" to 26"); avoid reaches farther than 650 mm (26"), see Figure 2.
Figure 2. ANSI BII.TR1-recommended maximum-reach distances
(to floor, without shoes)
Elbow Height
DUO-TOUCH
Inches
Millimeters
®
Run Bar with STB Buttons
Male/Female
995 / 926 mm
39.2" / 36.5"
90.0°
5%
1153 / 1074 mm
Male/Female
356 to 457 mm
45.4" / 42.3"
(14" to 18")
95%
P/N 131634 rev. B
559 to 660 mm
(22" to 26")
5