DSPIC30F3010-30I/SO Microchip Technology Inc., DSPIC30F3010-30I/SO Datasheet - Page 63

• Manufacturer Part Number: DSPIC30F3010-30I/SO
• Description: 16 BIT MCU/DSP 28LD 30MIPS 24 KB FLASH
• Manufacturer: Microchip Technology Inc.
• Type: DSPr

Specifications of DSPIC30F3010-30I/SO

• A/d Inputs: 6-Channels, 10-Bit
• Cpu Speed: 30 MIPS
• Eeprom Memory: 1K Bytes
• Input Output: 20
• Interface: I2C/SPI/UART, USART
• Ios: 20
• Memory Type: Flash
• Number Of Bits: 16
• Package Type: 28-pin SOIC
• Programmable Memory: 24K Bytes
• Ram Size: 1K Bytes
• Timers: 5-16-bit, 2-32-bit
• Voltage, Range: 2.5-5.5
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device

6.6.4
For protection, the write initiate sequence for NVMKEY
must be used to allow any erase or program operation
to proceed. After the programming command has been
executed, the user must wait for the programming time
until programming is complete. The two instructions
following the start of the programming sequence
should be NOPs.
EXAMPLE 6-3:
 2004 Microchip Technology Inc.
DISI
MOV
MOV
MOV
MOV
BSET
NOP
NOP
INITIATING THE PROGRAMMING
SEQUENCE
#5
#0x55,W0
W0
#0xAA,W1
W1
NVMCON,#WR
,
,
INITIATING A PROGRAMMING SEQUENCE
NVMKEY
NVMKEY
Preliminary
; Block all interrupts with priority <7
; for next 5 instructions
; Write the 0x55 key
;
; Write the 0xAA key
; Start the erase sequence
; Insert two NOPs after the erase
; command is asserted
dsPIC30F
DS70082G-page 61