WLNG-EK-DP551 Quatech, WLNG-EK-DP551 Datasheet - Page 44
![no-image](/images/no-image-200.jpg)
WLNG-EK-DP551
Manufacturer Part Number
WLNG-EK-DP551
Description
WiFi / 802.11 Modules & Development Tools AIRBORNE EVAL KIT EMBEDDED MODULES
Manufacturer
Quatech
Series
Airborne™r
Type
Transceiver, 802.11 b/gr
Datasheets
1.WLNG-AN-DP551.pdf
(2 pages)
2.WLNG-EK-DP551.pdf
(8 pages)
3.WLNG-EK-DP551.pdf
(62 pages)
Specifications of WLNG-EK-DP551
Mfg Application Notes
Transition to DP550 Devices AppNote
Frequency
2.4GHz ~ 2.4835GHz
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
For Use With/related Products
Airborne Modules
44
9.3
9.4
9.5
Determine and Store the Access Point SSID
On the Host computer, use the terminal emulation program to type the following
CLI commands in the order shown:
If your access point has security enabled, you will also need to use the CLI to
enter those parameters (See the CLI Reference Guide for details). That setup is
outside the scope of this user guide, which assumes that the AP being used has
no security.
After issuing the commands, press the reset switch (SW2) on the EVB. The EVB
restarts and the RF_ACT LED turn on solid to show that the module has
connected to the AP. You will need to reconnect the Telnet session after each
reset or restart.
Determine the Module’s IP address
On the Host computer, use the terminal emulation program to type the following
CLI commands:
Accessing the Module Using Telnet
On the Remote computer, use HyperTerminal to start a Telnet session. In the
first screen, name the session ‘TCP <Module IP>’ (for reference purposes only),
click on any icon you want to associate with this Telnet session, and click OK. In
the next screen, click TCP/IP (Winsock) for Connect Using. In the Host Address
field, type the module’s IP address. Leave the default Port Number value of 23
and click OK.
CLI Command
wl-scan<CR>
wl-ssid [SSID]<CR>
commit<CR>
CLI Command
auth dpac dpac <CR>
wl-ip<CR>
Table 46 - Ethernet Determine Modules IP Address
Airborne Enterprise EVB Users Guide
Table 45 - Ethernet SSID & Authentication
Description
The module scans for APs and returns information on
each one it discovers. Note the SSID value that is
returned, as you will need to enter it in the next
command
Associates the module with the AP who’s [SSID] you
specify. [SSID] is the value returned by the wl-scan
command.
Stores the information to flash memory.
Description
Authenticate with the firmware
The module returns the IP address assigned to it by the
DHCP server.
Quatech, Inc.
100-8082-110