MAX13342EETD+T Maxim Integrated Products, MAX13342EETD+T Datasheet

IC TXRX USB FS 3WIRE 14-TDFN

MAX13342EETD+T

Manufacturer Part Number
MAX13342EETD+T
Description
IC TXRX USB FS 3WIRE 14-TDFN
Manufacturer
Maxim Integrated Products
Type
Transceiverr
Datasheet

Specifications of MAX13342EETD+T

Number Of Drivers/receivers
1/1
Protocol
USB 2.0
Voltage - Supply
2.3 V ~ 3.6 V
Mounting Type
Surface Mount
Package / Case
14-TDFN Exposed Pad
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
The MAX13342E/MAX13345E USB-compliant trans-
ceivers are designed to minimize the area and external
components required to interface low-voltage ASICs to
USB. The devices comply with USB 2.0 specification for
full-speed-only (12Mbps) operation. The transceivers
include an internal 3.3V regulator, an internal 1.5kΩ D+
pullup resistor, and built-in ±15kV ESD protection cir-
cuitry to protect the USB I/0 ports (D+,D-). The
MAX13345E also has internal series resistors, allowing
it to be wired directly to a USB connector.
These devices operate with logic-supply voltages as
low as +2.3V, ensuring compatibility with low-voltage
ASICs. A low-power mode reduces current consump-
tion to less than 45µA. An enumerate function controls
the D+ pullup resistor, allowing devices to logically dis-
connect while remaining plugged in.
The MAX13342E has controlled output impedance of
2Ω (max) on D+/D-, allowing the use of external switch-
es to multiplex two different USB devices onto a single
USB connector. The MAX13345E has 43.5Ω (max)
internal resistors on D+/D- for direct connection to the
USB connector.
The MAX13342E/MAX13345E are equipped with DAT
and SE0 interface signals. These transceivers provide a
USB detection function that monitors the presence of
USB V
These devices operate over the extended -40°C to +85°C
temperature range and are available in UCSP™ 2.0mm x
1.5mm and 14-pin TDFN (3mm x 3mm) packages.
UCSP™ is a trademark of Maxim Integrated Products, Inc.
19-0621; Rev 0; 10/06
Pin Configurations and Selector Guide appear at end of data
sheet.
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
3-Wire Interface Full-Speed USB Transceivers
BUS
PDAs
PC Peripherals
Cellular Telephones
Data Cradles
MP3 Players
and signals the event.
________________________________________________________________ Maxim Integrated Products
With/Without Internal Series Resistors
General Description
Applications
o USB 2.0 (Full-Speed, 12Mbps)-Compliant
o Internal Pullup
o V
o Internal Series Resistors (MAX13345E)
o ±15kV (HBM) ESD Protection on D+, D-, and V
o Enumeration Input Controls D+ Pullup Resistor
o Supports 3-Wire DAT/SE0 Interface
o +2.3V to +3.6V Interface Voltage (V
o No Power-Supply Sequencing Required
o Low USB Output Impedance (MAX13342E)
*Future product—contact factory for availability.
+Denotes lead-free package.
EP = Exposed pad.
MAX13342EETD+
M AX13342E E BC + *
M A X1 3 3 45 EETD +
M AX13345E E BC + *
Typical Operating Circuits continued at end of data sheet.
Transceiver
VOLTAGE
INTERFACE
BUS
SYSTEM
SUPPLY
SYSTEM
PA RT
Detection
0.1µF
Typical Operating Circuits
PIN-
PA CK A G E
14 TD FN- E P
( 3mm x 3m m )
12 U C S P
( 2.0m m x 1.5m m )
14 TD FN- E P
( 3mm x 3m m )
12 U C S P
( 2.0m m x 1.5m m )
V
BD
DAT
SEO
OE
ENUM
SUS
L
Ordering Information
MAX13342E
GND
V
V
TRM
BUS
D+
D-
31.6Ω
31.6Ω
M A RK
T O P
AC U
AD A
AC Z
AC X
L
1µF
1µF
)
Features
CONNECTOR
PK G C O DE
USB
T1433- 2
T1433- 2
B12- 3
B12- 3
BUS
1

Related parts for MAX13342EETD+T

MAX13342EETD+T Summary of contents

Page 1

... BUS These devices operate over the extended -40°C to +85°C temperature range and are available in UCSP™ 2.0mm x 1.5mm and 14-pin TDFN (3mm x 3mm) packages. UCSP™ trademark of Maxim Integrated Products, Inc. PDAs PC Peripherals Cellular Telephones Data Cradles ...

Page 2

Interface Full-Speed USB Transceivers With/Without Internal Series Resistors ABSOLUTE MAXIMUM RATINGS (All voltages refer to GND unless otherwise noted.) Supply Voltage (V ) .............................................-0.3V to +6V BUS System Supply Voltage (V ) .....................................-0.3V to +6V L Output of Internal ...

Page 3

Interface Full-Speed USB Transceivers With/Without Internal Series Resistors ELECTRICAL CHARACTERISTICS (continued +4.0V to +5.5V +2.3V to +3.6V, T BUS L +2.5V +25°C.) (Note 1) A PARAMETER SYMBOL DIGITAL INPUTS AND OUTPUTS (DAT, SE0, ...

Page 4

Interface Full-Speed USB Transceivers With/Without Internal Series Resistors TIMING CHARACTERISTICS (V = +4V to +5.5V +2.3V to +3.6V, ENUM = V BUS L +5V +2.5V +25°C.) (Note PARAMETER SYMBOL TRANSMITTER ...

Page 5

Interface Full-Speed USB Transceivers With/Without Internal Series Resistors (V = +5V +3.3V +25°C, unless otherwise noted.) BUS L A DIFFERENTIAL RECEIVER PROPAGATION DELAY vs +85° ...

Page 6

Interface Full-Speed USB Transceivers With/Without Internal Series Resistors (V = +5V +3.3V +25°C, unless otherwise noted.) BUS L A MAX13342E/MAX13345E TRANSMITTING 20ns/div MAX13342E/MAX13345E BUS DETECTION 4µs 6 _______________________________________________________________________________________ Typical Operating Characteristics (continued) MAX13342E/MAX13345E RECEIVING SEO ...

Page 7

Interface Full-Speed USB Transceivers With/Without Internal Series Resistors PIN NAME TDFN UCSP Regulated Output Voltage. V with a 1µF (min) low-ESR capacitor, such as ceramic or plastic film types internal circuitry and the internal ...

Page 8

Interface Full-Speed USB Transceivers With/Without Internal Series Resistors ENUM SEO DAT OE SUS Figure 1. MAX13342E/MAX13345E Functional Diagram Detailed Description The MAX13342E/MAX13345E USB-compliant trans- ceivers are designed to minimize the area and external components required to ...

Page 9

Interface Full-Speed USB Transceivers With/Without Internal Series Resistors The MAX13342E/MAX13345E control signals are used to control the USB D+/D- lines. V side interface and sets the input and output thresholds of these signals. The control signals for the MAX13342E ...

Page 10

Interface Full-Speed USB Transceivers With/Without Internal Series Resistors 3-Wire DAT/SE0 Interface The MAX13342E/MAX13345E use DAT and SE0 to drive data or a single-ended zero onto the D+/D- lines. When OE is low, SE0 is an input and functions as ...

Page 11

Interface Full-Speed USB Transceivers With/Without Internal Series Resistors Table 3. Transmit Truth Table ( SUS = 0) INPUTS DAT SE0 Applications Information USB Data Transfer The MAX13342E/MAX13345E transmit USB ...

Page 12

Interface Full-Speed USB Transceivers With/Without Internal Series Resistors ESD Protection The MAX13342E/MAX13345E feature ±15kV (HBM) ESD protection on D+ and D-. The ESD structures withstand high ESD in all states: normal operation, suspend, and powered down. For the ±15kV ...

Page 13

Interface Full-Speed USB Transceivers With/Without Internal Series Resistors OHD 90% 10% V OLD Figure 3. Rise and Fall Times DAT SEO t PLH_DRV CRS_F CRS_L D+ Figure 4. Timing ...

Page 14

Interface Full-Speed USB Transceivers With/Without Internal Series Resistors OE DAT t PLZ_SE DAT t PHZ_SE SE0 t PLZ_SE SE0 t PHZ_SE Figure 7. Receiver Enable and Disable Timing FOR THE MAX13342E 31.6Ω D+/D- DUT LOAD FOR: 1) ENABLE TIME ...

Page 15

Interface Full-Speed USB Transceivers With/Without Internal Series Resistors 1MΩ 1.5kΩ DISCHARGE CHARGE-CURRENT- RESISTANCE LIMIT RESISTOR HIGH STORAGE VOLTAGE 100pF CAPACITOR DC SOURCE Figure 11. Human Body ESD Test Model ...

Page 16

Interface Full-Speed USB Transceivers With/Without Internal Series Resistors SYSTEM VOLTAGE SUPPLY 0.1µF BD SYSTEM DAT INTERFACE SEO OE ENUM SUS GPIO TOP VIEW (BUMP SIDE DOWN TRM B V BUS C 2.0mm x ...

Page 17

Interface Full-Speed USB Transceivers With/Without Internal Series Resistors (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information www.maxim-ic.com/packages.) COMMON DIMENSIONS MIN. MAX. SYMBOL A 0.70 0.80 ...

Page 18

... Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. 18 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 © 2006 Maxim Integrated Products Package Information (continued) ...

Related keywords