DK-PCIE-2SGX90N/UNIV Altera, DK-PCIE-2SGX90N/UNIV Datasheet - Page 21

• Manufacturer Part Number: DK-PCIE-2SGX90N/UNIV
• Manufacturer: Altera

Specifications of DK-PCIE-2SGX90N/UNIV

• Lead Free Status / Rohs Status: Supplier Unconfirmed

Introduction
Connect the
USB-Blaster
Cable to the
Board
Altera Corporation
August 2006
The Stratix
pre-programmed with the factory example design; however, you may
want to download your own design. This section discusses how to
download other design files.
w
An Altera
USB-Blaster cable’s 10-pin female plug to the Stratix II GX device’s JTAG
header on the Stratix II GX EP2SGX90 PCI Express development board
(U10), and connect the other end to the USB port on the computer running
the Quartus
This approach allows you to directly configure the Stratix II GX device
using an SRAM Object File (.sof). The kit’s reference design includes a
SOF for directly configuring the Stratix II GX device.
When connecting the JTAG side of the USB-Blaster cable, connect the
marker line on the cable to pin 1 of the header (J5). Pin 1 of J5 is numbered
on the board.
This document assumes that the development board is
connected to a computer using a PCIe x8 slot. An external power
supply and cables have been provided so that you can use the
development board without connecting it to a PCIe chassis.
WARNING: DO NOT CONNECT THE EXTERNAL POWER
SUPPLY TO THE PCIe BOARD IF IT IS BEING POWERED
FROM A BACKPLANE PCIe x8 SLOT.
To use the external power supply, connect the power cable to the
board and plug the other end into a power outlet, then place the
power switch (SW1) in the ON position. When power is
supplied to the board, the LED (D19) illuminates. If the board
does not power up after you connect the power cable, ensure
that the power switch (SW1) is in the ON position.
Getting Started User Guide
®
®
USB-Blaster
®
II GX PCI Express development board is shipped
II software.
™
PCI Express Development Kit, Stratix II GX Edition
Appendix A. Downloading
cable is provided with the kit. Connect the
Programming Files to the
Development Board
A–1