MCP23S17-E/SO Microchip Technology, MCP23S17-E/SO Datasheet - Page 14

• Manufacturer Part Number: MCP23S17-E/SO
• Description: IC I/O EXPANDER SPI 16B 28SOIC
• Manufacturer: Microchip Technology

Specifications of MCP23S17-E/SO

• Package / Case: 28-SOIC (7.5mm Width)
• Interface: SPI
• Number Of I /o: 16
• Interrupt Output: Yes
• Frequency - Clock: 10MHz
• Voltage - Supply: 1.8 V ~ 5.5 V
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Logic Family: MCP23S17
• Propagation Delay Time: 50 ns
• Operating Supply Voltage: 1.8 V to 5.5 V
• Power Dissipation: 700 mW
• Operating Temperature Range: - 40 C to + 125 C
• Input Voltage: 1.8 V to 5.5 V
• Logic Type: I/O Expander
• Maximum Clock Frequency: 10 MHz
• Maximum Operating Frequency: 1.7 MHz
• Mounting Style: SMD/SMT
• Output Current: 25 mA
• Output Voltage: 1.8 V to 4.5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: MCP23X17EV - BOARD EVAL FOR MCP23X17GPIODM-KPLCD - BOARD DEMO LCD GPIO EXP KEYPAD
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

MCP23017/MCP23S17
1.6.3
The GPINTEN register controls the interrupt-on-
change feature for each pin.
If a bit is set, the corresponding pin is enabled for
interrupt-on-change. The DEFVAL and INTCON
registers must also be configured if any pins are
enabled for interrupt-on-change.
REGISTER 1-3:
DS21952B-page 14
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-0
GPINT7
R/W-0
INTERRUPT-ON-CHANGE
CONTROL REGISTER
GPINT7:GPINT0: General purpose I/O interrupt-on-change bits <7:0>
1 = Enable GPIO input pin for interrupt-on-change event.
0 = Disable GPIO input pin for interrupt-on-change event.
Refer to INTCON and GPINTEN.
GPINT6
R/W-0
GPINTEN – INTERRUPT-ON-CHANGE PINS (ADDR 0x02)
W = Writable bit
‘1’ = Bit is set
GPINT5
R/W-0
GPINT4
R/W-0
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
GPINT3
R/W-0
GPINT2
R/W-0
© 2007 Microchip Technology Inc.
x = Bit is unknown
GPINT1
R/W-0
GPINT0
R/W-0
bit 0