SI2400-KS Silicon Laboratories Inc, SI2400-KS Datasheet - Page 62

• Manufacturer Part Number: SI2400-KS
• Description: IC ISOMODEM SYSTEM-SIDE 16SOIC
• Manufacturer: Silicon Laboratories Inc
• Type: Integrated Global DAAr

Specifications of SI2400-KS

• Package / Case: 16-SOIC (3.9mm Width)
• Data Format: V.21, V.22, V.23, Bell 103, Bell 212A
• Baud Rates: 2.4k
• Interface: UART
• Voltage - Supply: 3 V ~ 5.25 V
• Mounting Type: Surface Mount
• Product: Modem Chip
• Supply Voltage (min): 3 V
• Supply Current: 21 mA
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With: 336-1166 - BOARD EVAL FOR SI2400 ISOMODEM
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant
• Other names: 336-1093

Si2400
S82 (IST). Intrusion
Reset settings = 0000_0000
SDF (DGSR). Intrusion Deglitch
Reset settings = 0000_0000
62
Name
Name
Type
Type
Bit
7:4
2:1
Bit
6:0
Bit
3
0
Bit
7
Reserved
Reserved
D7
D7
DGSR
Name
Name
LCLD
IST
IB
D6
D6
Intrusion Settling Time.
0000 = IST equals 1 second.
Delay between when the ISOmodem goes off-hook and the off-hook intrusion algorithm
begins (250 ms units).
Loop Current Loss Detect.
0 = Disable.
1 = Enables the reporting of “I” and “L” result codes while off-hook. Will assert ALERT if
GPIO4 (SE2[7:6]) is enabled as ALERT. Will assert NLD (S14[2]).
Intrusion Blocking.
This feature only works when SDF ≠ 0x00. Defines the method used to block the off-hook
intrusion algorithm from operating after dialing has begun.
00 = No intrusion blocking.
01 = Intrusion disabled from start of dial to end of dial.
10 = Intrusion disabled from start of dial to register S29 time out.
11 = Intrusion disabled from start of dial to carrier detect or to “N” or “n” result code.
Read returns 0.
Read returns zero.
Deglitch Sample Rate.
Sets the sample rate for the deglitch algorithm and the off-hook intrusion algorithm
(40 ms units).
0000000 = Disables the deglitch algorithm, and sets the off-hook intrusion sample
rate to 200 ms and delay between compared samples to 800 ms.
R/W
IST
b
b
(0x00)
(0x00)
D5
D5
D4
D4
DGSR
LCLD
R/W
R/W
D3
D3
Rev. 1.3
D2
D2
R/W
Function
Function
IB
D1
D1
D0
D0