786554-1 TE Connectivity, 786554-1 Datasheet - Page 2

• Manufacturer Part Number: 786554-1
• Manufacturer: TE Connectivity

Specifications of 786554-1

• Product Type: Connector
• Pcb Mounting Orientation: Vertical
• Termination Method To Pc Board: Through Hole - Solder
• Pcb Mount Retention: With
• Pcb Mount Alignment: Without
• Shell Type: Full Metal
• Product Series: Series III
• Shell Material: Carbon Steel
• Bracket Material: Zinc
• Mating Retention Type: Latching
• Bracket Plating: Nickel over Copper
• Shielded: Yes
• Termination Post Length (mm [in]): 4.39 [0.173]
• Number Of Positions: 20
• Pcb Mount Retention Type: ACTION PIN (Compliant) Posts
• Mating Retention: With
• Centerline (mm [in]): 1.27 [0.050]
• Post Plating: Tin Lead over Nickel
• Shell Plating: Tin over Copper
• Contact Plating, Mating Area, Material: Gold (30)
• Contact Base Material: Phosphor Bronze
• Connector Style: Receptacle
• Mating Alignment: With
• Mating Alignment Type: Rails
• Housing Material: Thermoplastic - GF
• Ul Flammability Rating: UL 94V-0
• Housing Color: Black
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Pcb Thickness, Recommended (mm [in]): 1.57 – 2.36 [0.062 – 0.093]

3.4.
3.5.
Rev F
Exam ination of product.
Term ination resistance.
Insulation resistance.
Dielectric withstanding voltage.
Capacitance.
Vibration, random .
Physical shock.
Durability.
Perform ance and Test Description
Product is designed to m eet the electrical, m echanical and environm ental perform ance requirem ents
specified in Figure 1. Unless otherwise specified, all tests shall be perform ed at am bient environm ental
conditions per Test Specification 109-1.
Test Requirem ents and Procedures Sum m ary
Test Description
Meets requirem ents of product
drawing and Application Spec 114-
40029.
25 m illiohm s m axim um .
1000 m egohm s m inim um .
500 vac at sea level.
3 picofarads m axim um .
No discontinuities of 1 m icrosecond
or longer duration.
See Note.
No discontinuities of 1 m icrosecond
or longer duration.
See Note.
See Note.
Figure 1 (continued)
MECHANICAL
ELECTRICAL
Requirem ent
TE Spec 109-6-1.
TE Spec 109-28-4.
TE Spec 109-29-1.
Visual, dim ensional and functional
per applicable quality inspection
plan.
Subject m ated contacts assem bled
in housing to 50 m v m axim um open
circuit at 100 m a m axim um .
See Figure 5.
Test between adjacent contacts of
m ated sam ples.
Test between adjacent contacts of
m ated sam ples.
TE Spec 109-47, Condition E.
Test between adjacent circuits of
m ated sam ples.
TE Spec 109-21-5.
Subject m ated sam ples to 7.3 G's
rm s. 20 m inutes in each of 3
m utually perpendicular planes.
See Figures 6 and 7.
TE Spec 109-26-1, except 30 G's.
Subject m ated sam ples to 30 G's
half-sine shock pulses of 11
m illiseconds duration. 3 shocks in
each direction applied along 3
m utually perpendicular planes, 18
total shocks.
See Figures 6 and 7.
TE Spec 109-27.
Mate and unm ate sam ples without
locking latches for 500 cycles at
m axim um rate of 800 cycles per
hour.
Procedure
108-1228
2 of 7