CY8CKIT-017 Cypress Semiconductor Corp, CY8CKIT-017 Datasheet - Page 28
![no-image](/images/manufacturer_photos/0/1/179/cypress_semiconductor_corp_sml.jpg)
CY8CKIT-017
Manufacturer Part Number
CY8CKIT-017
Description
KIT DEV CAN/LIN EXPANSION BOARD
Manufacturer
Cypress Semiconductor Corp
Series
-r
Specifications of CY8CKIT-017
Accessory Type
Expansion Module
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
For Use With/related Products
CY8CKIT-001, CY8CKIT-030, CY3280-22X45
Other names
428-3108
Example Projects
5.1.4.1
28
CAN
CAN is the core component in this example project. The component enables you to set the message
IDs and the transmission mode.
In the CAN_Example_1 project the transmit message ID is set to 0x2FF, the receive message ID is
set to 0x3FF, and the baud rate is set to 500 kbps. The transmission mode is set to full TX/RX mode.
The CAN_Example_2 project has the same settings, except that the transmit message ID is set to
0x3FF, and the receive message ID is set to 0x2FF.
Notes
■
■
Figure 5-4. CAN Configuration: General Tab
Figure 5-5. CAN Configuration: Timing Tab
For details of parameters, refer to the component data sheets.
The component figure show only tabs in which settings have been changed from default states,
or in which critical settings exist for proper operation. Any tabs not shown have default settings.
This is valid for all components of all example projects.
CY8CKIT-017 CAN/LIN Expansion Board Kit Guide, Doc. # 001-57814 Rev. *B