ZMOT0BSB1A0AG Zilog, ZMOT0BSB1A0AG Datasheet - Page 31

• Manufacturer Part Number: ZMOT0BSB1A0AG
• Description: Processors - Application Specialized ZMB Nic RE200B-P Pyr Nic. NCL-9(26) Lens
• Manufacturer: Zilog

Specifications of ZMOT0BSB1A0AG

• Operating Supply Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Package / Case: SOIC-8
• Core: Z8FS040
• Number Of Timers: 2
• Processor Series: ZMOTION
• Program Memory Size: 4 KB
• Program Memory Type: Flash
• Lead Free Status / Rohs Status: Details

PS028511-0112
MD Suspend (Bit 4)
Motion Direction Control (Bit 3)
Motion Direction (Bit 2)
Motion Detected (Bit 1)
Motion Detection Suspend; controlled by the application.
• Temporarily suspends the PIR engine from running. This puts it in a very low processing overhead
0 = Normal Motion Detection.
1 = Suspended Motion Detection.
Motion Direction Control Enable; controlled by the application.
• This bit enables directional motion detection. The relative direction of the detected motion is indicated
• The directional polarity of PIR sensors is arbitrary at the time of manufacturing. Therefore it is
Relative Direction of Last Motion Detected; controlled by the PIR engine.
When directional motion detection is enabled, this bit indicates the relative direction of the last motion
detected. When the PIR engine sets the Motion Detected bit in PIR Status Register 0, this bit is set or
cleared to indicate the direction of the motion. The status is latched until the user application clears the
Motion Detected bit.
0 = Last detected motion was negative.
1 = Last detected motion was positive.
This status bit is undefined when Motion Direction Control is disabled.
Motion Detected on PIR Sensor
Set by the PIR engine; cleared by the application.
This bit indicates that the Engine has detected a motion event. The user application should routinely
check this bit to determine if motion has been detected. This bit is set by the Engine and must be
cleared by the user application.
0 = No motion detected by the Engine.
1 = Motion has been detected by the Engine.
SUSPEND Mode is exited upon the next ADC interrupt.
in bit 2 (Motion Direction) of this same register. When configured as a directional detector (bit 3 set
to 1), direction is indicated in bit 2 as positive or negative relative to the PIR sensor.
necessary for the user application to calibrate to each individual PIR sensor using a controlled target
(i.e. moving in a known direction) and internally record the polarity to identify which polarity represents
that direction.
state and can be used when the application requires significant CPU processing power. While
suspended, motion detection is disabled, however to ensure fast recovery from this mode, ADC
interrupts still occur and samples continue to be buffered. When the application clears this bit,
0 = Standard Motion Detection Mode. Motion detected in any direction. Motion Direction status bit
(Bit 2) is not valid.
1 = Directional Motion Detection Mode. Motion is detected in any direction; relative direction is
indicated via Motion Direction status bit (Bit 2).
ZMOTION™ Detection and Control Family
Product Specification
Standard API Register Set
24