FLUKE-190-204/AM Fluke Electronics, FLUKE-190-204/AM Datasheet - Page 14

• Manufacturer Part Number: FLUKE-190-204/AM
• Description: SCOPEMETER 4CH 200MHZ COLOR AMER
• Manufacturer: Fluke Electronics
• Series: ScopeMeter® 190r
• Type: Handheldr

Specifications of FLUKE-190-204/AM

• Bandwidth: 200MHz
• Channels: 4
• Display Type: LCD - Color
• Features: DMM, USB Interface, Save, Recall, Record, Trend
• Probe Type: 10:1 Voltage Probe (1 Blue, 1 Green, 1 Red, 1 Gray)
• Sampling Rate (per Second): 1.25GS/s
• Input Impedance: 1M
• Rise Time (typ): 1.7nS
• Voltage - Input (max): CAT III 1000V, CAT IV 600V
• Voltage - Supply: 7.2V Battery, 17.8VDC Adapter
• Includes: Alligator Clips, Battery Charger/Adapter, Case, Hook Clips, Probe Set, Software, Test Leads, USB Cable
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 614-1174

Users Manual
6
To avoid electrical shock or fire:
• Use only the Fluke power supply, Model
• Before use check that the selected/indicated
• For the BC190/808 universal Power Adapter
To accommodate connection to various line
power sockets, the BC190/808 universal Power
Adapter is equipped with a male plug that must
be connected to a line cord appropriate for local
use. Since the adapter is isolated, the line cord
does not need to be equipped with a terminal for
connection to protective ground. Since line cords
with a protective grounding terminal are more
commonly available you might consider using
these anyhow.
BC190 (Power Adapter).
range on the BC190 matches the local line
power voltage and frequency.
only use line cords that comply with the local
safety regulations.
Warning
Note:
To avoid electrical shock or fire if a product
input is connected to more than 42 V peak
(30 Vrms) or 60 V dc:
• Use only insulated voltage probes, test leads
• Before use, inspect voltage probes, test leads
• Remove all probes, test leads and
• Always connect the power adapter first to the
• Do not touch voltages >30 V ac rms, 42 V ac
• Do not connect the ground spring (figure 1,
• Do not apply more than the rated voltage,
and adapters supplied with the product, or
indicated by Fluke as suitable for the Fluke
190 Series II ScopeMeter series.
and accessories for mechanical damage and
replace when damaged.
accessories that are not in use.
ac outlet before connecting it to the product.
peak, or 60 V dc.
item d) to voltages higher than 42 V peak
(30 Vrms) from earth ground.
between the terminals or between each
terminal and earth ground.
Warning