ADG1236YRUZ Analog Devices Inc, ADG1236YRUZ Datasheet - Page 8

• Manufacturer Part Number: ADG1236YRUZ
• Description: IC SWITCH DUAL SPDT 16TSSOP
• Manufacturer: Analog Devices Inc
• Series: iCMOS®r
• Type: Analog Switchr

Specifications of ADG1236YRUZ

• Function: Switch
• Circuit: 2 x SPDT
• On-state Resistance: 260 Ohm
• Voltage Supply Source: Single Supply
• Voltage - Supply, Single/dual (±): 12V, 15V
• Current - Supply: 1µA
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: 16-TSSOP (0.173", 4.40mm Width)
• Analog Switch Type: SPDT
• No. Of Channels: 2
• Bandwidth: 1GHz
• On State Resistance Max: 190ohm
• Turn Off Time: 70ns
• Turn On Time: 125ns
• Supply Voltage Range: 10.8V To 13.2V
• Multiplexer Configuration: Dual SPDT
• Number Of Inputs: 2
• Number Of Outputs: 4
• Number Of Channels: 2
• Analog Switch On Resistance: 475@10.8VOhm
• Analog Switch Turn On Time: 150ns
• Analog Switch Turn Off Time: 190ns
• Package Type: TSSOP
• Power Supply Requirement: Single/Dual
• Single Supply Voltage (typ): 12V
• Dual Supply Voltage (typ): ±15V
• Power Dissipation: 3.5mW
• Supply Current: 0.23mA
• Mounting: Surface Mount
• Pin Count: 16
• Operating Temp Range: -40C to 125C
• Operating Temperature Classification: Automotive
• Package: 16TSSOP
• Maximum On Resistance: 475@10.8V Ohm
• Maximum Propagation Delay Bus To Bus: 150@±15V|190@12V ns
• Maximum High Level Output Current: 25 mA
• Switch Architecture: SPDT
• Power Supply Type: Single|Dual
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

ADG1236
TERMINOLOGY
I
The positive supply current.
I
The negative supply current.
V
The analog voltage on Terminals D and S.
R
The ohmic resistance between D and S.
R
Flatness is defined as the difference between the maximum and
minimum value of on resistance as measured over the specified
analog signal range.
I
The source leakage current with the switch off.
I
The drain leakage current with the switch off.
I
The channel leakage current with the switch on.
V
The maximum input voltage for Logic 0.
V
The minimum input voltage for Logic 1.
I
The input current of the digital input.
C
The off switch source capacitance, measured with reference to
ground.
DD
SS
S
D
D
INL
ON
FLAT(ON)
S
D
INL
INH
, I
(Off)
(Off)
(Off)
(V
(I
S
(On)
INH
S
)
)
Rev. 0 | Page 8 of 16
C
The off switch drain capacitance, measured with reference to
ground.
C
The on switch capacitance, measured with reference to ground.
C
The digital input capacitance.
t
The delay time between the 50% and 90% points of the digital
input and switch on condition when switching from one
address state to another.
Charge Injection
A measure of the glitch impulse transferred from the digital
input to the analog output during switching.
Off Isolation
A measure of unwanted signal coupling through an off switch.
Crosstalk
A measure of unwanted signal that is coupled through from one
channel to another as a result of parasitic capacitance.
Bandwidth
The frequency at which the output is attenuated by 3 dB.
On Response
The frequency response of the on switch.
Insertion Loss
The loss due to the on resistance of the switch.
THD + N
The ratio of the harmonic amplitude plus noise of the signal to
the fundamental.
TRANS
D
D
IN
, C
(Off)
S
(On)