M25P64-VME6TG Micron Technology Inc, M25P64-VME6TG Datasheet - Page 39

• Manufacturer Part Number: M25P64-VME6TG
• Manufacturer: Micron Technology Inc

Specifications of M25P64-VME6TG

• Cell Type: NOR
• Density: 64Mb
• Access Time (max): 8ns
• Interface Type: Serial (SPI)
• Boot Type: Not Required
• Address Bus: 1b
• Operating Supply Voltage (typ): 3.3V
• Operating Temp Range: -40C to 85C
• Package Type: VDFPN EP
• Program/erase Volt (typ): 8.5 to 9.5V
• Sync/async: Synchronous
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (min): 2.7V
• Operating Supply Voltage (max): 3.6V
• Word Size: 8b
• Number Of Words: 8M
• Supply Current: 8mA
• Mounting: Surface Mount
• Pin Count: 8
• Lead Free Status / Rohs Status: Compliant

8
9
Initial delivery state
The device is delivered with the memory array erased: all bits are set to 1 (each byte
contains FFh). The Status Register contains 00h (all Status Register bits are 0).
Maximum rating
Stressing the device outside the ratings listed in
the device. These are stress ratings only, and operation of the device at these, or any other
conditions outside those indicated in the Operating sections of this specification, is not
implied. Exposure to Absolute Maximum Rating conditions for extended periods may affect
device reliability. Refer also to the Numonyx SURE Program and other relevant quality
documents.
Table 9.
1. Compliant with JEDEC Std J-STD-020C (for small body, Sn-Pb or Pb assembly) and the European
2. Avoid applying VPPH to the W/VPP pin during Bulk Erase with process technology T9HX devices,
3. JEDEC Std JESD22-A114A (C1=100 pF, R1 = 1500 Ω, R2 = 500 Ω).
Symbol
directive on Restrictions on Hazardous Substances (RoHS) 2002/95/EU
identified by process identification digit "4" in the device marking.
T
T
V
V
V
V
LEAD
STG
ESD
CC
PP
IO
Absolute maximum ratings
Storage Temperature
Lead Temperature during Soldering
Input and Output Voltage (with respect to Ground)
Supply Voltage
Fast Program/Erase Voltage
Electrostatic Discharge Voltage (Human Body model)
Parameter
(2)
Table 9
may cause permanent damage to
(3)
–2000
Min.
–0.5
–0.2
–0.2
–65
See note
V
Max.
2000
10.0
150
0.6
4.0
CC
(1)
+
Unit
°C
°C
V
V
V
V
39/54