AFBR-57F5PZ Avago Technologies US Inc., AFBR-57F5PZ Datasheet - Page 12

no-image

AFBR-57F5PZ

Manufacturer Part Number
AFBR-57F5PZ
Description
56T4982
Manufacturer
Avago Technologies US Inc.
Datasheet

Specifications of AFBR-57F5PZ

Applications
Fibre Channel And ISCSI HBA Cards
Data Rate Max
14.025Gbps
Supply Voltage
3.8V
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Table 10. Transceiver SOFT DIAGNOSTIC Timing Characteristics
(T
Parameter
Hardware TX_DISABLE Assert Time
Hardware TX_DISABLE Negate Time
Time to initialize, including reset of TX_FAULT
Hardware TX_FAULT Assert Time
Hardware TX_DISABLE to Reset
Hardware RX_LOS Deassert Time
Hardware RX_LOS Assert Time
Hardware RATE_SELECT Assert Time
Hardware RATE_SELECT Deassert Time
Software TX_DISABLE Assert Time
Software TX_DISABLE Negate Time
Software Tx_FAULT Assert Time
Software Rx_LOS Assert Time
Software Rx_LOS Deassert Time
Software Rate_Select Assert Time
Software Rate_Select Deassert Time
Analog parameter data ready
Serial bus hardware ready
Serial bus buff er time
Write Cycle Time
Serial ID Clock Rate
Notes:
10. Time from fault to two-wire interface TX_FAULT (A2h, byte 110, bit 2) asserted.
11. Time for two-wire interface assertion of Rx_LOS (A2h, byte 110, bit 1) from loss of optical signal.
12. Time for two-wire interface de-assertion of Rx_LOS (A2h, byte 110, bit 1) from presence of valid optical signal.
13. From power on to data ready bit asserted (A2h, byte 110, bit 0). Data ready indicates analog monitoring circuitry is functional.
14. Time from power on until module is ready for data transmission over the serial bus (reads or writes over A0h and A2h).
15. Time from stop bit to completion of a 1-8 byte write command.
16. Time between STOP and START commands.
17. Time from rising or falling edge of Rate_Select input until transceiver is successfully passing traffi c as designated by RS(0) and RS(1). For Rate_
18. Time from two-wire interface Assertion of Rate_Select (either RS(0) in A2h, byte 110, bit 3 or RS(1) in A2h, byte 118, bit 3) to when the respective
19. Time from two-wire interface Deassertion of Rate_Select (either RS(0) in A2h, byte 110, bit 3 or RS(1) in A2h, byte 118, bit 3) to when the respec-
12
1. Time from rising edge of TX_DISABLE to when the optical output falls below 10% of nominal.
2. Time from falling edge of TX_DISABLE to when the modulated optical output rises above 90% of nominal.
3. Time from power on or falling edge of Tx_Disable to when the modulated optical output rises above 90% of nominal.
4. From power on or negation of TX_FAULT using TX_DISABLE.
5. Time TX_DISABLE must be held high to reset the laser fault shutdown circuitry.
6. Time from loss of optical signal to Rx_LOS Assertion.
7. Time from valid optical signal to Rx_LOS De-Assertion.
8. Time from two-wire interface assertion of TX_DISABLE (A2h, byte 110, bit 6) to when the optical output falls below 10% of nominal. Measured
9. Time from two-wire interface de-assertion of TX_DISABLE (A2h, byte 110, bit 6) to when the modulated optical output rises above 90% of nomi-
C
from falling clock edge after stop bit of write transaction.
nal.
Select going high, the internal CDR will lock on valid 64b/66b encoded 14.025 Gb/s data within the specifi ed time. For Rate_Select going low,
the internal CDR will be bypassed within the specifi ed time for transmission of valid 8b/10b encoded 8.5Gb/s or 4.25Gb/s data.
CDR is engaged at 14.025Gb/s data rate.
tive CDR is bypassed for low speed 8.5Gb/s or 4.25Gb/s operation.
= 0°C to 70°C, VccT, VccR = 3.3 V ±5%)
Symbol
t_init
t_reset
t_loss_on
t_loss_off
t_rate_high
t_rate_low
t_off _soft
t_loss_off _soft
t_rate_on_soft
t_rate_off _soft
t_buf
t_write
f_serial_clock
t_off
t_on
t_fault
t_on_soft
t_fault_soft
t_loss_on_soft
t_data
t_serial
Minimum
10
20
Maximum
10
1
300
100
100
100
1
1
100
100
100
100
100
100
100
1000
300
10
100
Unit
μs
ms
ms
μs
μs
μs
μs
ms
ms
ms
ms
ms
ms
ms
ms
ms
ms
ms
μs
ms
kHz
Notes
Note 1
Note 2
Note 3
Note 4
Note 5
Note 6
Note 7
Note 17
Note 17
Note 8
Note 9
Note 10
Note 11
Note 12
Note 18
Note 19
Note 13
Note 14
Note 16
Note 15

Related parts for AFBR-57F5PZ