3140RQ0124 APEM Components, 3140RQ0124 Datasheet - Page 5

• Manufacturer Part Number: 3140RQ0124
• Description: 84R1057
• Manufacturer: APEM Components

Specifications of 3140RQ0124

• No. Of Axes: 2
• Supply Voltage Max: 5V
• Centre Voltage: 2V
• Switch Terminals: Connector
• Handle Style: Skirted
• Svhc: No SVHC (20-Jun-2011)
• Handle Type1: Skirted
• Terminal Type: Connector
• Rohs Compliant: Yes

Note: The company reserves the right to change specifications without notice.
Gain (Output Voltage Span): +/-10% x V to +/-
50%*V
Output at Centre: V/2 +/- (5% xGain)
Power Supply: 5V +/-0.5V Transient free (Configs
1, 3, 4 & 5) or 3.3V +/-0.1V (Config 2)
Centre Tap Impedance: 1K1
Centre Detect Output: Pulled high within joystick
via 2K2 to +V, and smoothed to 0V with 100nF
Sensor Type: Hall effect
Current Consumption: <13mA (Two axes) -
<20mA (Three axes)
Loads: Minimum 10K, preferred 100K+
MECHANICAL
Materials Employed : Shaft - Stainless Steel,
Gaiter (Boot) - Neoprene, Others - Brass, Nylon,
ABS
Weight: 100g
Mechanical Operating Angle: X and Y Axes +/-
18 Degrees (subject to choice of limiter).
Z Axis +/-25 Degrees
Max Load to Mechanism: 400N
Please refer to Apem for assistance on how to achieve the best performance from your chosen configuration.
All parameters shown are based on a standard configuration and are provided for guidance only.
3000 SERIES - CONTACTLESS JOYSTICKS
ELECTRICAL
PRODUCT SPECIFICATION
TECHNICAL SPECIFICATION
www.apem.com
Storage : -40C to +70C
Operating Temperature: -25C to +70C
Seal Above Panel: IP 65 - Neoprene gaiter (boot)
fitted as standard
EMC Emissions: Complies with EN 61000-6-
3:2001 CISPR 22:2005 Class B 30MHz - 11GHz
Life Cycles: 10,000,000 cycles (5,000,000 for 3
axes joysticks)
ESD: Complies with EN61000-4-2 (extended) +
-8KV (20 contacts) & +-15KV (20 air discharges)
EMC Immunity: 100V/m, 80MHz-2.7GHz, 1KHz
80% sine wave modulation, EN 61000-4-3
(extended)
Vibration: 100Hz - 200Hz @ 0.13g²/Hz, total
3.6gRMS (1 Hour in each of the three mutually
perpendicular axes)
ENVIRONMENTAL
5