5962-9305702MPA Linear Technology, 5962-9305702MPA Datasheet - Page 9

• Manufacturer Part Number: 5962-9305702MPA
• Manufacturer: Linear Technology

Specifications of 5962-9305702MPA

• Lead Free Status / Rohs Status: Not Compliant

DSCC FORM 2234
APR 97
accordance with MIL-PRF-38535. Inspections to be performed shall be those specified in MIL-PRF-38535 and herein for groups
A, B, C, D, and E inspections (see 4.4.1 through 4.4.4).
MIL-PRF-38535 including groups A, B, C, D, and E inspections and as specified herein. Quality conformance inspection for
device class M shall be in accordance with MIL-PRF-38535, appendix A and as specified herein. Inspections to be performed
for device class M shall be those specified in method 5005 of MIL-STD-883 and herein for groups A, B, C, D, and E inspections
(see 4.4.1 through 4.4.4).
4.4.2 Group C inspection. The group C inspection end-point electrical parameters shall be as specified in table II herein.
4.4.2.1 Additional criteria for device class M. Steady-state life test conditions, method 1005 of MIL-STD-883:
4.3 Qualification inspection for device classes Q and V. Qualification inspection for device classes Q and V shall be in
4.4 Conformance inspection. Technology conformance inspection for classes Q and V shall be in accordance with
4.4.1 Group A inspection.
a.
b.
c.
a.
b.
DEFENSE SUPPLY CENTER COLUMBUS
Test condition A, B, C, or D. The test circuit shall be maintained by the manufacturer under document revision level
control and shall be made available to the preparing or acquiring activity upon request. The test circuit shall specify the
inputs, outputs, biases, and power dissipation, as applicable, in accordance with the intent specified in method 1005 of
MIL-STD-883.
T
Test duration: 1,000 hours, except as permitted by method 1005 of MIL-STD-883.
Tests shall be as specified in table II herein.
Subgroups 4, 5, 6, 7, and 8 table I, method 5005 of MIL-STD-883 shall be omitted.
A
= +125 ° C, minimum.
MICROCIRCUIT DRAWING
COLUMBUS, OHIO 43218-3990
1/ PDA applies to subgroup 1.
Interim electrical
Final electrical
Group A test
Group C end-point electrical
Group D end-point electrical
Group E end-point electrical
parameters (see 4.2)
parameters (see 4.2)
requirements (see 4.4)
parameters (see 4.4)
parameters (see 4.4)
parameters (see 4.4)
STANDARD
Test requirements
TABLE II. Electrical test requirements.
method 5005, table I)
1, 2, 3, 9, 10, 11 1/
(in accordance with
MIL-STD-883,
Subgroups
class M
Device
1, 2, 3
- - -
- - -
1
1
SIZE
A
1, 2, 3, 9, 10,
MIL-PRF-38535, table III)
class Q
Device
11 1/
1, 2, 3
REVISION LEVEL
- - -
- - -
(in accordance with
1
1
Subgroups
B
1, 2, 3, 9, 10,
class V
Device
11 1/
1, 2, 3
1, 2, 3
- - -
- - -
1
SHEET
5962-93057
9