TDA5255XT Infineon Technologies, TDA5255XT Datasheet - Page 57

• Manufacturer Part Number: TDA5255XT
• Manufacturer: Infineon Technologies

Specifications of TDA5255XT

• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Industrial
• Product Depth (mm): 4.4mm
• Product Length (mm): 9.7mm
• Operating Supply Voltage (min): 2.1V
• Operating Supply Voltage (max): 5.5V
• Lead Free Status / Rohs Status: Compliant

Default values
In case of using the evaluation board, the crystal with its typical parameters (fp=18.08958MHz,
C
each are used the following default states are set in the device
Table 3-6
3.2.7
Quartz: fp=18.08958MHz; C1=8fF; C0=2,08pF; CL=20pF (typical values)
Cv1=10pF, Cv2=1.8pF, Cv3=15pF
Table 3-7
Table 3-8
Tolerance values in Table 3-8 are valid, if pin 21 is not connected. Establishing the connection to
pin 21 the tolerances increase by +/- 27ppm (internal capacitors), if internal tuning is not used.
Concerning the frequency tolerances of the whole system also crystal tolerances (tuning
tolerances, temperature stability, tolerance of C L ) have to be considered.
In addition to the chip tolerances also the crystal and external component tolerances have to be
considered in the tuning and non-tuning case.
Data Sheet
1
=8fF, C
+FSK-TX / ASK-RX
ASK-TX / FSK-RX
Inductivity of the crystal oscillator
Operating state
Internal capacitors (+/- 10%)
0
Supply Voltage (2.1...5.5V)
Supply Voltage(2.1...5.5V)
Temperature (-40...+85C)
Temperature (-40...+85C)
=2,08pF, C
-FSK-TX
Frequency set accuracy
Chip and System Tolerances
Default oscillator settings
Internal Tuning
Default Setup (without internal tuning & without Pin21 usage)
Total
Total
Part
Part
L
=20pF) and external capacitors with Cv1=10pF, Cv2=1.8pF, Cv3=15pF
434.16 MHz
Frequency
+35 kHz
-35 kHz
57
Frequency tolerance
Frequency tolerance
@ 434MHz
+/- 10.8kHz
+/- 18.7kHz
@ 434MHz
+/- 1.3kHz
+/- 3.5kHz
+/- 0.9kHz
+/- 5.7kHz
+/- 3.5kHz
+/- 3.5kHz
+/- 0.9kHz
.
Rel. tolerance
Rel. tolerance
+/- 13ppm
+/- 25ppm
+/- 43ppm
+/- 3ppm
+/- 8ppm
+/- 2ppm
+/- 8ppm
+/- 8ppm
+/- 2ppm
TDA5255 E1
Version 1.2
Application
2007-02-26