C2012X6S0J106M TDK Corporation, C2012X6S0J106M Datasheet - Page 12

• Manufacturer Part Number: C2012X6S0J106M
• Description: CAP CER 10UF 6.3V 20% X6S 0805
• Manufacturer: TDK Corporation
• Series: Cr

Specifications of C2012X6S0J106M

• Capacitance: 10µF
• Voltage - Rated: 6.3V
• Tolerance: ±20%
• Temperature Coefficient: X6S
• Mounting Type: Surface Mount, MLCC
• Operating Temperature: -55°C ~ 105°C
• Applications: General Purpose
• Ratings: -
• Package / Case: 0805 (2012 Metric)
• Size / Dimension: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Height - Seated (max): -
• Thickness (max): 0.037" (0.95mm)
• Lead Spacing: -
• Features: -
• Lead Style: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 445-7618-2

(continued)
No.
*As for the initial measurement of capacitors (Class2) on number 7,11,12,13 and 14, leave capacitors at
16
150 –10,0°C for 1 hour and measure the value after leaving capacitors for 24±2h in ambient condition.
Life
Item
External
appearance
Capacitance
Q
(Class1)
D.F.
(Class2)
Insulation
Resistance
No mechanical damage.
Characteristics
1,000MΩ or 50MΩ·μF min.
(As for the capacitors of rated
voltage 16, 10, 6.3V DC and the
item below, 1,000 MΩ or
10MΩ·μF min.,) whichever
smaller.
C1005X5R1E683
C1005X5R1E104
C1608X5R1E334
C1608X5R1E474
C1608X5R1E684
C1608X5R1E105
C2012X5R1E335
C2012X5R1E475
C : Rated capacitance (pF)
X5R : 200% of initial spec. max.
X7R : 200% of initial spec. max.
Y5V : 150% of initial spec. max.
30pF and over
10pF and over
to under 30pF
Characteristics
Class1
Class2
Capacitance
Under 10pF
Performance
C0G
X5R
X7R
Y5V
—— 11 ——
Please refer to
the table A in
the end of the
specification.
Change from the
value before test
275+5/2×C min.
200+10×C min.
350 and over
Q
Reflow solder the capacitors on a
P.C.Board shown in Appendix 1a or
Appendix 1b before testing.
Test condition : maximum operating
temperature ±2°C for 1,000 +48,0h
As for applied voltage, please refer to
the table A in the end of the
specification.
.
Charge/discharge current shall not
exceed 50mA.
Leave the capacitors in ambient
condition for 6 to 24h (Class1) or
24±2h (Class2) before measurement.
Voltage conditioning
Voltage treat the capacitors under
testing temperature and voltage for 1
hour.
Leave the capacitors in ambient
condition for 24±2h before
measurement.
Use this measurement for initial value.
Test or inspection method