SC16IS762IPW-S NXP Semiconductors, SC16IS762IPW-S Datasheet - Page 28
![IC UART DUAL I2C/SPI 28-TSSOP](/photos/6/52/65262/568-28-tssop_sot361-1_sml.jpg)
SC16IS762IPW-S
Manufacturer Part Number
SC16IS762IPW-S
Description
IC UART DUAL I2C/SPI 28-TSSOP
Manufacturer
NXP Semiconductors
Datasheet
1.SC16IS752IBS151.pdf
(59 pages)
Specifications of SC16IS762IPW-S
Features
Low Current
Number Of Channels
2, DUART
Fifo's
64 Byte
Protocol
RS232, RS485
Voltage - Supply
2.5V, 3.3V
With Auto Flow Control
Yes
With False Start Bit Detection
Yes
With Modem Control
Yes
Mounting Type
Surface Mount
Package / Case
28-TSSOP (0.173", 4.40mm Width)
For Use With
568-4000 - DEMO BOARD SPI/I2C TO DUAL UART568-3510 - DEMO BOARD SPI/I2C TO UART
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
568-2241
NXP Semiconductors
SC16IS752_SC16IS762_7
Product data sheet
8.10 Scratchpad Register (SPR)
8.9 Modem Status Register (MSR)
This 8-bit register provides information about the current state of the control lines from the
modem, data set, or peripheral device to the host. It also indicates when a control input
from the modem changes state.
channel.
Table 21.
Remark: The primary inputs RI, CD, CTS, DSR are all active LOW.
The SC16IS752/SC16IS762 provides a temporary data register to store 8 bits of user
information.
Bit
7
6
5
4
3
2
1
0
Symbol
MSR[7]
MSR[6]
MSR[5]
MSR[4]
MSR[3]
MSR[2]
MSR[1]
MSR[0]
Modem Status Register bits description
Dual UART with I
Description
CD (active HIGH, logical 1). If GPIO6 or GPIO2 is selected as CD
modem pin through IOControl register bit 1 or bit 2, the state of CD pin
can be read from this bit. This bit is the complement of the CD input.
Reading IOState bit 6 or bit 2 does not reflect the true state of CD pin.
RI (active HIGH, logical 1). If GPIO7 or GPIO3 is selected as RI modem
pin through IOControl register bit 1 or bit 2, the state of RI pin can be
read from this bit. This bit is the complement of the RI input. Reading
IOState bit 7 or bit 3 does not reflect the true state of RI pin.
DSR (active HIGH, logical 1). If GPIO4 or GPIO0 is selected as DSR
modem pin through IOControl register bit 1 or bit 2, the state of DSR pin
can be read from this bit. This bit is the complement of the DSR input.
Reading IOState bit 4 or bit 0 does not reflect the true state of DSR pin.
CTS (active HIGH, logical 1). This bit is the complement of the CTS
input.
Cleared on a read.
Rev. 07 — 19 May 2008
CD. Indicates that CD input has changed state. Cleared on a read.
RI. Indicates that RI input has changed state from LOW to HIGH.
DSR. Indicates that DSR input has changed state. Cleared on a read.
CTS. Indicates that CTS input has changed state. Cleared on a read.
Table 21
2
shows Modem Status Register bit settings per
SC16IS752/SC16IS762
C-bus/SPI interface, 64-byte FIFOs, IrDA SIR
© NXP B.V. 2008. All rights reserved.
28 of 59