794606-3 TE Connectivity, 794606-3 Datasheet - Page 2

• Manufacturer Part Number: 794606-3
• Manufacturer: TE Connectivity

Specifications of 794606-3

• Product Type: Contact
• Product Line: Micro MATE-N-LOK
• Voltage (vac): 250
• Current Rating (a): 5
• Termination Method: Crimp
• Wire Range (mm [awg]): 0.20-0.60² [24-20]
• Contact Type: Socket
• Contact Plating, Mating Area, Material: Gold (30)
• Contact Base Material: Phosphor Bronze
• Rohs/elv Compliance: Not ELV/RoHS compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Applies To: Wire/Cable
• Packaging Method: Strip

3.3.
3.4.
3.5.
Initial examination of product.
Final examination of product.
Termination resistance.
Insulation resistance.
Dielectric withstanding voltage.
Temperature rise vs current.
Rev D
Ratings
!
!
!
Performance and Test Description
Product is designed to meet the electrical, mechanical and environmental performance requirements
specified in Figure 1. Unless otherwise specified, all tests shall be performed at ambient environmental
conditions per EIA-364.
Test Requirements and Procedures Summary
Test Description
Voltage: 250 volts AC or DC
Current: See Figure 1 for applicable current carrying capability
Temperature: -40 to 105° C
Meets requirements of product
drawing.
Meets visual requirements.
20 milliohms maximum.
1000 megohms initial.
100 megohms final.
1 minute hold with no breakdown,
flashover, or .5 milliampere
maximum leakage.
30° C maximum temperatur e rise at
specified current (100% energized).
Wire Size Connector Amperes
(AWG)
20
20
28
28
Figure 1 (continued)
ELECTRICAL
Requirement
Position
22 to 24
2 to 6
8 to 24
2 to 20
4.25
1.8
5
2
EIA-364.
Visual and dimensional © of C)
inspection per product drawing.
EIA-364.
Visual inspection.
EIA-364-23.
Subject specimens to 100
milliamperes maximum and 20
millivolts maximum open circuit
voltage.
See Figure 3.
EIA-364-21.
Test between adjacent contacts of
mated specimens.
EIA-364-20, Condition I.
1500 volts AC at sea level.
Test between adjacent contacts of
mated specimens.
EIA-364-70, Method 1.
Stabilize at a single current level
until 3 readings at 5 minute intervals
are within 1° C.
Procedure
108-1836
2 of 7