750340-1 TE Connectivity, 750340-1 Datasheet - Page 4

• Manufacturer Part Number: 750340-1
• Manufacturer: TE Connectivity

Specifications of 750340-1

• Product Type: Connector
• Pcb Mounting Orientation: Vertical
• Front Panel Grounding: With
• Front Panel Screw-down: With
• Pcb Mount Retention: Without
• Gender: Receptacle
• Stacked: No
• Color Code: None
• Pcb Mount Style: Through Hole
• Inner Shield Material: Copper Alloy
• Outer Shield Material: Copper Alloy
• Shielded: Yes
• Grounding Clips: Without
• Solder Tail Contact Plating: Tin-Lead
• Connector Configuration: Mini DIN
• Number Of Positions: 8
• Inner Shield Plating: Tin-lead over Nickel
• Outer Shield Plating: Tin-lead over Copper
• Contact Plating, Mating Area, Material: Gold (15)
• Contact Base Material: Copper Alloy
• Underplate Material: Nickel
• Housing Material: Thermoplastic - GF
• Ul Flammability Rating: UL 94V-0
• Housing Color: Black
• Spdif Connector: Without
• Rohs/elv Compliance: ELV compliant, 5 of 6 Compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C

3.6.
4.
4.1.
4.2.
Rev F
Product Qualification and Requalification Test Sequence
QUALITY ASSURANCE PROVISIONS
Qualification Testing
A.
B.
Requalification Testing
If changes significantly affecting form, fit or function are made to product or manufacturing process,
product assurance shall coordinate requalification testing, consisting of all or part of original testing
sequence as determined by development/product, quality and reliability engineering.
NOTE
Sample Selection
Samples shall be prepared in accordance with applicable Instruction Sheets and shall be selected
at random from current production. All test groups shall each consist of a minimum of 5
connectors.
Test Sequence
Qualification inspection shall be verified by testing samples as specified in Figure 2.
Examination of product
Termination resistance
Insulation resistance
Dielectric withstanding voltage
Transfer impedance
Solderability
Vibration
Physical shock
Durability
Mating force
Unmating force
Thermal shock
Humidity-temperature cycling
Temperature life
Mixed flowing gas
(a) See paragraph 4.1.A.
(b) Numbers indicate sequence in which tests are performed.
(c)
(d) Terminations made with 75% braided shielded cable.
(e) Use substitute plugs to prevent shielding degradation due to cold flow of cable plastic.
Test or Examination
Precondition samples with 10 cycles durability.
1,9
3,7
1
5
6
4
2
8
Figure 2
3(c)
1,5
2,4
2
Test Sequence (b)
Test Group (a)
3(c)
1,5
2,4
3
1,8
2,6
3,7
4
4
5
2,4(d)
3(e)
1,5
5
1,3
6
2
108-1225
4 of 6