2180736-1 TE Connectivity, 2180736-1 Datasheet - Page 2

• Manufacturer Part Number: 2180736-1
• Manufacturer: TE Connectivity

Specifications of 2180736-1

• Product Type: Cage, Connector
• Gender: Receptacle
• Number Of Ports: 4
• Pcb Mounting Orientation: Right Angle
• Plug Configuration: Mini-SAS HD
• Receptacle Configuration: Mini-SAS HD
• Pcb Mount Style: Through Hole Press Fit
• Pcb Mount Retention: With
• Keyed: No
• Stackable: No
• Termination Post Length (mm [in]): 1.64 [0.065]
• Height Above Pc Board (mm [in]): 16.44 [0.647]
• Number Of Positions: 144
• Number Of Rows: Dual
• Pcb Mount Retention Type: M2 Screws
• Mount Type: PC Board (Direct Mount)
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold (30), Gold Flash over (50) Palladium Nickel
• Housing Material: GF Liquid Crystal Polymer (LCP)
• Housing Color: Black
• Ul Flammability Rating: UL 94V-0
• Shell: With
• Lightpipe: With
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• High Temperature Housing: Yes
• Pcb Thickness, Recommended (mm [in]): 0.97 [0.038]
• Packaging Method: Tray

3.4.
3.5.
Initial examination of product.
Final examination of product.
Low Level Contact Resistance
(LLCR).
Insulation resistance.
Withstanding voltage.
Random vibration.
Mechanical shock.
Durability.
Plug insertion force.
Rev O4
Performance and Test Description
Product is designed to meet the electrical, mechanical and environmental performance requirements
specified in Figure 1. Unless otherwise specified, all tests shall be performed at ambient environmental
conditions.
Test Requirements and Procedures Summary
Test Description
Meets requirements of product
drawing and Application
Specification 114-13316.
Meets visual requirements.
∆R 20 milliohms maximum for
signal contacts.
1000 megohms minimum.
One minute hold with no breakdown
or flashover.
No discontinuities of 1 microsecond
or longer duration.
See Note.
No discontinuities of 1 microsecond
or longer duration.
See Note.
See Note.
100 N [22.5 lbf] maximum.
Figure 1 (continued)
MECHANICAL
ELECTRICAL
Requirement
EIA-364-18.
Visual and dimensional (C of C)
inspection per product drawing.
EIA-364-18.
Visual inspection.
EIA-364-23.
Subject specimens to 100
milliamperes maximum and 20
millivolts maximum open circuit
voltage.
EIA-364-21.
100 volts DC, 2 minute hold.
Test between adjacent contacts.
EIA-364-20, Condition I.
300 volts AC at sea level.
Test between adjacent contacts,
signal to signal and signal to ground
as applicable.
EIA-364-28, Test Condition VII,
Condition Letter D.
Subject mated specimens to 3.10
G's rms between 20 to 500 Hz.
Fifteen minutes in each of 3
mutually perpendicular planes.
EIA-364-27, Method H.
Subject mated specimens to 30 G's
half-sine shock pulses of 11
milliseconds duration. Three shocks
in each direction applied along 3
mutually perpendicular planes, 18
total shocks.
EIA-364-9.
Mate and unmate specimens for
250 cycles at a maximum rate of
500 cycles per hour with latches
engaged.
EIA-364-13.
Measure force necessary to mate
specimens with latches engaged at
a maximum rate of 12.7 mm [.5 in]
per minute.
Procedure
108-2462
2 of 5