2180736-1 TE Connectivity, 2180736-1 Datasheet - Page 3

• Manufacturer Part Number: 2180736-1
• Manufacturer: TE Connectivity

Specifications of 2180736-1

• Product Type: Cage, Connector
• Gender: Receptacle
• Number Of Ports: 4
• Pcb Mounting Orientation: Right Angle
• Plug Configuration: Mini-SAS HD
• Receptacle Configuration: Mini-SAS HD
• Pcb Mount Style: Through Hole Press Fit
• Pcb Mount Retention: With
• Keyed: No
• Stackable: No
• Termination Post Length (mm [in]): 1.64 [0.065]
• Height Above Pc Board (mm [in]): 16.44 [0.647]
• Number Of Positions: 144
• Number Of Rows: Dual
• Pcb Mount Retention Type: M2 Screws
• Mount Type: PC Board (Direct Mount)
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold (30), Gold Flash over (50) Palladium Nickel
• Housing Material: GF Liquid Crystal Polymer (LCP)
• Housing Color: Black
• Ul Flammability Rating: UL 94V-0
• Shell: With
• Lightpipe: With
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• High Temperature Housing: Yes
• Pcb Thickness, Recommended (mm [in]): 0.97 [0.038]
• Packaging Method: Tray

Plug extraction force.
Latch retention.
Rotational cable pull.
Thermal shock.
Humidity/temperature cycling.
Temperature life.
Mixed flowing gas.
Thermal disturbance.
Rev O4
NOTE
Test Description
Shall meet visual requirements, show no physical damage, and meet
requirements of additional tests as specified in the Product Qualification and
Requalification Test Sequence shown in Figure 2.
50 N [11.25 lbf] maximum.
133.5 N [30 lbf] minimum.
33.4 N [7.5 lbf] minimum without
displacement of cage assembly or
connector from Printed Circuit
Board (PCB).
See Note.
See Note.
See Note.
See Note.
See Note.
ENVIRONMENTAL
Figure 1 (end)
Requirement
EIA-364-13.
Measure force necessary to un-
mate specimens with latches
disengaged at a maximum rate of
12.7 mm [.5 in] per minute.
Apply specified load to engaged
cable plug connector and hold for 1
minute.
Load cabled module into
cage/connector assembly applied to
PCB with attached bezel. Rotate
cable 40 degrees toward PCB, and
then rotate 360 degrees with the
load still applied.
EIA-364-32, Test Condition I.
Subject mated specimens to 10
cycles between -55 and 85°C with
30 minute dwells at temperature
extremes and 1 minute transition
between temperatures.
EIA-364-31, Method III.
Subject mated specimens to 10
cycles (10 days) between 25 and
65°C at 80 to 100% RH.
EIA-364-17, Method A, Test
Condition 2, Test Time Condition C.
Subject mated specimens to 85°C
for 500 hours.
EIA-364-65, Class IIA (4 gas).
Subject board mounted specimens
to environmental Class IIA for 14
days. Seven days unmated and 7
days mated.
EIA-364-32.
Subject mated and board mounted
specimens to 10 temperature cycles
between 15 ± 3°C and 85 ± 3°C as
measured on the part. Ramp times
shall be a minimum of 2°C per
minute with dwell times long enough
to ensure contacts reach the
temperature extremes (5 minutes
minimum). Humidity not controlled.
Procedure
108-2462
3 of 5