D-110-0083 TE Connectivity, D-110-0083 Datasheet
![](/photos/42/27/422767/prc_sml.jpg)
D-110-0083
Manufacturer Part Number
D-110-0083
Description
Manufacturer
TE Connectivity
Datasheet
1.D-110-0083.pdf
(1 pages)
Specifications of D-110-0083
Product Type
Wire Splice
Splice Type
SolderSleeve
Connection Type
Solder
Cma (min.-max) (cma [mm²])
16,200 – 25,000 [8.10 – 12.50]
Rohs/elv Compliance
ELV compliant
Lead Free Solder Processes
Not relevant for lead free process
Rohs/elv Compliance History
Always was ELV compliant
Fluid Resistance
Splash Protection
Operating Temperature (max.) (°c)
150
Wire Temperature Rating Range (max.)
125° C to 150° C
Application
Wire to Wire Splicing
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked polyvinylidene
2. SOLDER PREFORM WITH FLUX:
APPLICATION
1. This part is designed to make in-line splices in wires having:
2. Part may be installed using a Raychem IR-1052 or equivalent infrared heater.
3. Wires are to be stripped 25.4 (1.0) and overlapped 12.7 to17.8 (0.5 to 0.7) under the solder preform.
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
DRAWN BY:
If this document is printed it becomes uncontrolled. Check for the latest revision
SOLDER: TYPE Sn63 per ANSI J-STD-006.
FLUX:
a) Bare copper or tin plated conductors.
b) A combined CMA between 16,200 and 25,000.
c) A combined insulation diameter per side between 4.06 and 8.76 (0.160 and 0.345).
fluoride.
M. FORONDA
ANGLES: N/A
ROUGHNESS IN
MICRON
TYPE ROM1 per ANSI-J-STD-004.
Tyco Electronics Corporation
300 Constitutional Drive
Menlo Park, CA 94025 USA
REPLACES:
Tyco reserves the right to amend this drawing at any
time. Users should evaluate the suitability of the
product for their application.
N/A
SPECIFICATION CONTROL DRAWING
DCR NUMBER:
RAYCHEM
D990724
TITLE:
DOCUMENT NO.:
DATE:
PROD. REV.
A
06-July-00
SOLDERSLEEVE WIRE SPLICE,
D-110-0083
SCALE:
None
8.76 (0.345) I.D.
SIZE:
A
DOC. ISSUE:
1
SHEET:
1 of 1