MAX7306 Maxim, MAX7306 Datasheet - Page 7

• Manufacturer Part Number: MAX7306
• Description: The MAX7306/MAX7307 I²C-/SMBus™-compatible, serial-interfaced peripherals feature four level-translating I/Os and operate from a 1
• Manufacturer: Maxim

The MAX7306/MAX7307 4-port, general-purpose port
expanders operate from a 1.62V to 3.6V power supply.
Ports P2 through P4 can be configured as inputs, push-
pull outputs, and open-drain outputs. Port P1 can be
configured as an input and an open-drain output; P1
can also be configured to function as an (INT) output.
Each port configured as an open-drain or push-pull
output can sink up to 25mA. Push-pull outputs also
have a 10mA source drive capability. The MAX7306/
MAX7307 are rated to sink a total of 100mA into any
combination of the output ports. Output ports have
PWM and blink capabilities, as well as logic drive.
SMBus/I
MAX7306 ONLY
SDA
SCL
_______________________________________________________________________________________
2
Detailed Description
C Interfaced 4-Port, Level-Translating
MAX7306/
MAX7307
REGISTER
BANK
I 2 C
CONTROL
OUTPUT
LOGIC
V
I/O
DD
On power-up, the MAX7307 default configuration has
all ports configured as input ports with logic levels ref-
erenced to V
has all ports configured as input ports with logic levels
referenced to V
status flag resets and stays high (see Tables 1 and 2).
The device configuration registers set up the interrupt
function, serial-interface bus timeout, PWM/blink, oscil-
lator options, global blink period, and reset options
(see Tables 3 and 4).
GPIOs and LED Drivers
LA
Device Configuration Registers
. The MAX7306 default configuration
INPUT
LOGIC
DD
V
I/O
LA
. The transition detection interrupt
MAX7307 ONLY
Block Diagram
Initial Power-Up
P1–P4
7