HS2633ECH61H Renesas Technology / Hitachi Semiconductor, HS2633ECH61H Datasheet - Page 15

• Manufacturer Part Number: HS2633ECH61H
• Description: Accessories, Interface Cable
• Manufacturer: Renesas Technology / Hitachi Semiconductor

2.2
To connect the cable head to the user system, follow the instructions below.
2.2.1
After checking the location of pin 1 on the IC socket, determine where to install the IC socket by
using the guide pins provided as shown in figure 3. Apply epoxy resin adhesive to the end of the four
projections at the bottom of the IC socket, and fasten it to the user system before soldering.
6
product before the USER SYSTEM INTERFACE CABLE
is connected to or removed from any part. Before
connecting, make sure that pin 1 on both sides are correctly
aligned. Failure to do so will result in a FIRE HAZARD and
will damage the user system and the emulator product or
will result in PERSONAL INJURY. The USER PROGRAM will
be LOST.
Connecting User System Interface Cable to User System
Always switch OFF the user system and the emulator
Installing IC Socket
WARNING