AMIS710200 AMI Semiconductor, Inc., AMIS710200 Datasheet - Page 3

• Manufacturer Part Number: AMIS710200
• Description: 200dpi Cis Module
• Manufacturer: AMI Semiconductor, Inc.

AMIS-710200:200dpi CIS Module
4.0 Pin Out Description
There is one connector located at the end of the module. The outline of the module in Figure 4 of the mechanical section illustrates the
connector location. With the module window facing down on flat surface, the viewer looking down on backside of the module and with
the connector's pins facing the viewer, the connector is located on the left hand end of the module. The connector is a 2.0mm dual 8-
pin row with a total of 16 pin connector, part # Berg 88054-X16. Its I/O designation is provided in Table 1. Pin number 1’s location is
indicated on the module outline. All of the odd pins are on the bottom row with Pin 1 on the edge closest to the end of the module. All
of the even pins are on the top row with Pin 2 located adjacent to Pin 1.
Table 1:I/O Designation
AMI Semiconductor – May 06, M-8-001
www.amis.com
Pin Number
1, 2 , 4, & 8
11 & 12
13 & 14
15 & 16
9 & 10
5 & 6
3
7
Vn (-5V to –12V)
Vdd (+5V)
Symbol
GLED
VLED
Vout
Gnd
SP
CP
Figure 2: AMIS-710200 Cross Section
Names and Functions
Ground; 0V
Analog video output
Positive power supply
Start clock pulse
Negative power supply
Sampling clock pulse
Ground for the light source; 0V
Supply for the light source
3
Data Sheet