GS1559-CBE2 Gennum Corp., GS1559-CBE2 Datasheet - Page 45
![no-image](/images/no-image-200.jpg)
GS1559-CBE2
Manufacturer Part Number
GS1559-CBE2
Description
HD-LINX II Multi-Rate Deserializer with Loop-Through Cable Driver
Manufacturer
Gennum Corp.
Datasheet
1.GS1559-CBE2.pdf
(74 pages)
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Part Number:
GS1559-CBE2
Manufacturer:
GENNUM
Quantity:
20 000
GS1559 Preliminary Data Sheet
4.10.2.1 Programmable Ancillary Data Detection
Although the GS1559 will detect all types of ancillary data by default, it also allows
the host interface to specifically program up to five different ancillary data types for
detection. This is accomplished via the ANC_TYPE register
(Table
4-5).
For each data type to be detected, the host interface must program the DID and/or
SDID of the ancillary data type of interest. The GS1559 will compare the received
DID and/or SDID with the programmed values and assert YANC and CANC only if
an exact match is found.
If any DID or SDID value is set to zero in the ANC_TYPE register, no comparison
or match will be made for that value. For example, if the DID is programmed but
the SDID is set to zero, the device will detect all ancillary data types matching the
DID value, regardless of the SDID.
In the case where all five DID and SDID values are set to zero, the GS1559 will
detect all ancillary data types. This is the default setting after device reset.
Where one or more, but less than five, DID and/or SDID values have been
programmed, then only those matching ancillary data types will be detected and
indicated.
NOTE 1: The GS1559 will always detect EDH ancillary data packets for EDH error
detection purposes, regardless of which DID/SDID values have been programmed
for ancillary data indication, (see
Section
4.10.5.2).
NOTE 2: See SMPTE 291M for a definition of ancillary data terms.
30572 - 1
November 2004
Proprietary and Confidential
45 of 74