WM8959 Wolfson Microelectronics Ltd., WM8959 Datasheet - Page 82
WM8959
Manufacturer Part Number
WM8959
Description
Mobile Multimedia DAC with Dual-mode Class AB/D Speaker Driver
Manufacturer
Wolfson Microelectronics Ltd.
Datasheet
1.WM8959.pdf
(155 pages)
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
WM8959
Manufacturer:
WolfsonMicro
Quantity:
887
Company:
Part Number:
WM8959ECS/RV
Manufacturer:
VISHAY
Quantity:
8 620
- Current page: 82 of 155
- Download datasheet (2Mb)
WM8959
w
INTERRUPT EVENT OUTPUT
An interrupt can be generated by any of the following events described earlier:
The interrupt status flag IRQ is asserted when any un-masked Interrupt input is asserted. It is the
OR’d combination of all the un-masked Interrupt inputs. If required, this flag may be inverted using
the IRQ_INV register bit. The GPIO pins can be configured to output the IRQ signal.
The interrupt behaviour is driven by level detection (not edge detection) of the un-masked inputs.
Therefore, if an input remains asserted after the interrupt register has been reset, then the interrupt
status flag IRQ will be triggered again even though no transition has occurred. If edge detection is
required (eg. confirming that the input has been de-asserted), then the polarity inversion may be
used after each event in order to detect each rising and falling edge separately. This is described
further in the “GPIO Summary” section.
The status of the IRQ flag may be read back via the control interface. The status of each GPIO pin
and the internal signals PLL_LCK, TEMPOK, MICSHRT and MICDET may also be read back in the
same way.
The IRQ register (R18) is described in Table 47. The status of the GPIO pins or other Interrupt inputs
can be read back via the read/write bits R18[11:0]. The Interrupt inputs are latched once set. Each
input may be reset by writing a 1 to the appropriate bit. The IRQ bit cannot be reset; it is the OR’d
combination of all other registers and will reset only if R18[11:0] are all 0.
If direct output of the Interrupt signal is required to external pins of the WM8959, the following
register settings are required:
•
•
•
•
•
•
•
•
•
•
Button Control input (on GPIO1, GPIO3 to GPIO5, GPI7 and GPI8)
MICBIAS current / short circuit / accessory detect
PLL Lock
Temperature Sensor
GPIO1_ENA = 1 (only required if using GPIO1)
AIF_SEL = 0 (only required if using GPIO3, GPIO4 or GPIO5)
AIF_TRIS = 0
GPIOn_SEL = 0111 for the selected Interrupt (IRQ) output pin
GPIOn_PU = 0 for the selected Interrupt (IRQ) output pin
GPIOn_PD = 0 for the selected Interrupt (IRQ) output pin
PP, May 2008, Rev 3.1
Pre-Production
82
Related parts for WM8959
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
Specifications: Manufacturer: Wolfson Microelectronics ; Product Category: ADC (A/D Converters) ; RoHS: Details ; Number of Converters: 1 ; Number of ADC Inputs: 1 ; Conversion Rate: 6 MSPs ; Resolution: 16 bit ; Input Type: Voltage ; Interface
Manufacturer:
Wolfson Microelectronics Ltd.
Datasheet:
Part Number:
Description:
Manufacturer:
Wolfson Microelectronics Ltd.
Datasheet:
Part Number:
Description:
Manufacturer:
Wolfson Microelectronics Ltd.
Datasheet:
Part Number:
Description:
Manufacturer:
Wolfson Microelectronics Ltd.
Datasheet:
Part Number:
Description:
Manufacturer:
Wolfson Microelectronics Ltd.
Datasheet:
Part Number:
Description:
Manufacturer:
Wolfson Microelectronics Ltd.
Datasheet:
Part Number:
Description:
WM8192 : 16-BIT, 6MSPS Cis/ccd Image Digitiser With Multiplexed Output
Manufacturer:
Wolfson Microelectronics Ltd.
Datasheet:
Part Number:
Description:
The WM8978 is a low power, high quality stereo codec designed for portable applications such as Digital still camera or Digital Camcorde
Manufacturer:
Wolfson Microelectronics Ltd.
Datasheet:
Part Number:
Description:
The WM8976 is a low power, high quality stereo codec designed for portable applications such as Digital still camera or Digital Camcorde
Manufacturer:
Wolfson Microelectronics Ltd.
Datasheet:
Part Number:
Description:
WM8141 : 12-BIT 6MSPS Cis/ccd Analogue Front End/digitiser
Manufacturer:
Wolfson Microelectronics Ltd.
Datasheet:
Part Number:
Description:
WM8143 : 10 or 12-BIT, 4MSPS Analogue Front End For CCD Image Sensors
Manufacturer:
Wolfson Microelectronics Ltd.
Datasheet:
Part Number:
Description:
WM8143 : 10 or 12-BIT, 4MSPS Analogue Front End For CCD Image Sensors
Manufacturer:
Wolfson Microelectronics Ltd.
Datasheet:
Part Number:
Description:
Integrated 10-bit Data Acquisition System For Imaging Applications
Manufacturer:
Wolfson Microelectronics Ltd.
Datasheet:
Part Number:
Description:
12-bit ( 8+4-bit ) Linear Sensor Image Processor
Manufacturer:
Wolfson Microelectronics Ltd.
Datasheet:
Part Number:
Description:
WM8148 : 12-BIT/12 MSPS Ccd/cis Analogue Front End/digitiser
Manufacturer:
Wolfson Microelectronics Ltd.
Datasheet: