ADAM-4571S ETC, ADAM-4571S Datasheet - Page 52

• Manufacturer Part Number: ADAM-4571S
• Description: (ADAM-4570 / ADAM-4571) User Manual
• Manufacturer: ETC

www.DataSheet4U.com
42
“Lost Connection from the Device”
Due to device shut down or network failure, the configuration
utility has lost connection after 5 seconds.
“Fail to apply this setting to the device”
Specific settings are not accepted by EDG Series.
“The device fails to respond”
The connected device does not respond.
“Fail to reset the device”
Fail to reset the EDG Series.
3.3.1 Connection Diagnostic
When you complete the configuration of your EDG Series, you
can follow the steps to check if the EDG Series connects to
network or not.
1. Execute the Microsoft DOS program.
2. Execute “PING” command and type your IP address of EDG
Advantech EDG series User’s Manual
Series. If EDG Series connects to your network, it will display
in the screen. If the EDG Series cannot be pinged, you will
need to ask someone at the remote site to check and see if the
power is on, and make sure that the connection is okay.