ISL45042 Intersil Corporation, ISL45042 Datasheet - Page 2

• Manufacturer Part Number: ISL45042
• Description: LCD Module Calibrator
• Manufacturer: Intersil Corporation

Pin Descriptions
Block Diagram
CTL
AVDD
OUT
GND
V
CTL
SET
N/C
PIN
CE
DD
Adjustable Sink Current Output Pin. The current sinks into the OUT pin is equal to the DAC setting times the maximum adjustable sink
current divided by 128. See SET pin function description for the maxim adjustable sink current setting.
High-Voltage Analog Supply. Connects to top of external resistor divider to determine the VCOM voltage. Typically 10V to 20V. Bypass
to GND with 0.1µF de-coupling capacitor.
No Connect. Not internally connected.
Ground connection.
ISL45042 power supply input. Bypass to GND with 0.1µF de-coupling capacitor.
Internal Counter Up/Down Control and Internal EEPROM Programming Control Input. If CE is high, a mid-to-low transition increments
the 7-bit counter, raising the DAC setting, increasing the OUT sink current, and lowering the divider voltage at OUT. A mid-to-high
transition decrements the 7-bit counter, lowering the DAC setting, decreasing the OUT sink current, and increasing the divider voltage
at OUT. Applying 4.9V and above with appropriately arranged timing will overwrite EEPROM with the contents in the 7-bit counter.
See EEPROM Programming section for details.
Counter Enable Pin. Connect CE to V
further adjustment or programming (note: the CE pin has an internal pull down resistor).
Maximum Sink Current Adjustment Point. Connect a resistor from the SET pin to GND to set the maximum adjustable sink current of
the OUT pin. The maximum adjustable sink current is equal to (AVDD/20) divided by RSET. The maximum set current has to be less
than 120μA.
400kΩ
500kΩ
to
DIGITAL INTERFACE
WITH THRESHOLD
GND
SENSORS
2
CE
V
DD
PWRUP
PRGM
DWN
POR
PRGM
UP
POR
DD
to enable adjustment of the output sink current. Float or connect CE to GND to prevent
UP/DOWN COUNTER
NVL MEMORY
ISL45042
WITH PRESET
READ
EEPROM
ISL45042
LATCHES
IBIAS
OR
FUNCTION
PRGM MEMORY
CURRENT OUTPUT
ANALOG DCP AND
BLOCK
AVDD
November 14, 2006
IOUT
SET
FN6072.6