T546HW01-V1 AUO, T546HW01-V1 Datasheet - Page 31

• Manufacturer Part Number: T546HW01-V1
• Description: LCD Module
• Manufacturer: AUO

8-3 ELECTROSTATIC DISCHARGE CONTROL
Since a module is composed of electronic circuits, it is not strong to electrostatic discharge. Make certain that
treatment persons are connected to ground through wrist band etc. And don’t touch interface pin directly.
8-4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE
Strong light exposure causes degradation of polarizer and color filter.
8-5 STORAGE
When storing modules as spares for a long time, the following precautions are necessary.
(1) Store them in a dark place. Do not expose the module to sunlight or fluorescent light. Keep the temperature
(2) The polarizer surface should not come in contact with any other object. It is recommended that they be
8-6 HANDLING PRECAUTIONS FOR PROTECTION FILM
(1) The protection film is attached to the bezel with a small masking tape. When the protection film is peeled off,
(2) When the module with protection film attached is stored for a long time, sometimes there remains a very
(3) You can remove the glue easily. When the glue remains on the Bezel or its vestige is recognized, please wipe them off
©Copyright AU Optronics Corp.
2009 All Rights Reserved.
No Reproduction and Redistribution Allowed
between 5° C and 35°C at normal humidity.
stored in the container in which they were shipped.
static electricity is generated between the film and polarizer. This should be peeled off slowly and carefully
by people who are electrically grounded and with well ion-blown equipment or in such a condition, etc.
small amount of flue still on the Bezel after the protection film is peeled off.
with absorbent cotton waste or other soft material like chamois soaked with normal-hexane
T546HW01 V1
www.DataSheet.co.kr
31/31
Datasheet pdf - http://www.DataSheet4U.net/