USB HOST DRIVER V03 Freescale Semiconductor / Motorola, USB HOST DRIVER V03 Datasheet - Page 134

• Manufacturer Part Number: USB HOST DRIVER V03
• Description: USB Host Driver v03
• Manufacturer: Freescale Semiconductor / Motorola

9.2.5.
Get (Alternate) Interface:
This test issues a
specified interface number. A Device without alternate interfaces should either support
this command or respond with a stall, otherwise a warning is generated.
Set (Alternate) Interface:
This test issues a
specified interface number. A Device without alternate interfaces should either support
this command or respond with a stall, otherwise a warning is generated.
9.2.6.
Get Status:
Gets status from the endpoint. If
the endpoint is verified with endpoint status
Set Feature:
This test issues a
endpoints only. If the
set, and this will be verified with a
Clear Feature:
This test issues a
endpoints only. If the
reset, and this will be verified with a
9.2.7.
Get String Descriptors
If this option is specified, the string corresponding to the string descriptor will be
acquired for the Device, along with configuration and interface descriptors.
Perform remote wakeup
This option is not supported by this Driver version. It may be supported in later versions
of Driver.
To start automatic testing click “Start” button.
To cancel test click “Stop” button.
To select all options click “Select All” button.
To deselect all options click “Deselect All” button.
M
Interface Tests.
Endpoint test.
Other Tests.
ClearFeature Stall
Get Interface
Set Feature Stall
PRELIMINARY—SUBJECT TO CHANGE WITHOUT NOTICE
Set Interface
Appendix 3:Test Suite for MCF5272 USB Protocol Stack.
Get Status
Get Status
Set Feature
Get Status
command, which receives the alternate setting for the
option is selected, the
option is selected, the
Get Status
command, which sets the alternate setting for the
command. This test is run on interrupt and bulk
command. This test is run on interrupt and bulk
ENDPOINT_HALT
request.
or
request.
Clear Feature
ENDPOINT_HALT
ENDPOINT_HALT
bit.
options are selected
bit should be
bit should be
9-6