B150PN01 AU, B150PN01 Datasheet - Page 13

• Manufacturer Part Number: B150PN01
• Description: TFT LCD Module
• Manufacturer: AU

www.DataSheet4U.com
(C) Copyright AU Optronics, Inc.
July, 2001 All Rights Reserved.
No Reproduction and Redistribution Allowed.
+RED5
+RED4
+RED3
+RED2
+RED1
+RED0
+GREEN 5
+GREEN 4
+GREEN 3
+GREEN 2
+GREEN 1
+GREEN 0
+BLUE 5
+BLUE 4
+BLUE 3
+BLUE 2
+BLUE 1
+BLUE 0
-DTCLK
DSPTMG
VSYNC
HSYNC
Note: Output signals from any system shall be low or Hi-Z state when VDD is off.
Input signals shall be low or Hi-Z state when VDD is off.
It is recommended to refer the specifications of SN75LVDS86DGG(Texas Instruments) in detail.
Signal electrical characteristics are as follows;
5.4 Signal Electrical Characteristics
Signal Name
Red Data 5 (MSB)
Red Data 4
Red Data 3
Red Data 2
Red Data 1
Red Data 0 (LSB)
Red-pixel Data
Green Data 5 (MSB)
Green Data 4
Green Data 3
Green Data 2
Green Data 1
Green Data 0 (LSB)
Green-pixel Data
Blue Data 5 (MSB)
Blue Data 4
Blue Data 3
Blue Data 2
Blue Data 1
Blue Data 0 (LSB)
Blue-pixel Data
Data Clock
Display Timing
Vertical Sync
Horizontal Sync
Description
Red-pixel Data
Each red pixel's brightness data consists of these
6 bits pixel data.
Green-pixel Data
Each green pixel's brightness data consists of
these 6 bits pixel data.
Blue-pixel Data
Each blue pixel's brightness data consists of
these 6 bits pixel data.
The typical frequency is 54.0 MHZ.. The signal is
used to strobe the pixel data and DSPTMG
signals. All pixel data shall be valid at the falling
edge when the DSPTMG signal is high.
This signal is strobed at the falling edge of
-DTCLK. When the signal is high, the pixel data
shall be valid to be displayed.
The signal is synchronized to -DTCLK .
The signal is synchronized to -DTCLK .
B150PN01 Ve r.06
13/20