upd178016 Renesas Electronics Corporation., upd178016 Datasheet - Page 22

• Manufacturer Part Number: upd178016
• Description: 8-bit Single-chip Microcontroller
• Manufacturer: Renesas Electronics Corporation.

22
Initial setting
diode
ERR_COR1
ERR_COR2
ERR_COR3
FAD
FLASH
NOCLK
NO_PIM
These switches are used to select the number of error correction bits when RDS data is decoded.
Set these switches as indicated in the following table.
This switch is used to select whether the fader of the electronic volume control is adjusted.
Set this switch as indicated in the following table.
This switch is used to select the method of displaying “:” (colon).
The setting of this switch is invalid in no-clock mode (initial setting diode NOCLK = 0).
Set this switch as indicated in the following table.
This switch is used to specify whether the clock is to be provided.
Set this switch as indicated in the following table.
This switch is used to select whether PI check of AF is muted.
Set this switch as indicated in the following table.
(0: Open, 1: Jumpered, : Don’t care)
(0: Open, 1: Jumpered)
(0: Open, 1: Jumpered)
(0: Open, 1: Jumpered)
(0: Open, 1: Jumpered)
ERR_COR1
NO_PIM
NOCLK
FLASH
FAD
0
0
0
0
1
1
1
0
1
0
1
0
1
0
1
Adjusted.
Not adjusted.
Blinks at 1 Hz (duty factor: 60 %).
However, extinguished in power-off mode.
Lights.
The clock is available.
The clock is unavailable.
The clock can be backed up (with low current consumption) when a low level signal is
input to the ACC or BATT pin.
Muted.
Not muted.
ERR_COR2
0
0
1
1
0
0
1
ERR_COR3
0
1
0
1
0
1
Description
Error is not corrected.
1-bit correction
2-bit correction
3-bit correction
4-bit correction
5-bit correction
Error is not corrected.
Muting of PI check of AF
Availability of the clock
Colon (:) display
Fader function
Error correction
PD178016GC-051