sm145g0 NEC Tokin, sm145g0 Datasheet - Page 7

• Manufacturer Part Number: sm145g0
• Description: Fusible Alloy Thermal Sensitive Type Amperes Va.c. Amperes Vd.c. Rated Current
• Manufacturer: NEC Tokin

Recommendation
If you desire any clarifications or explanations regarding these cautions, please call an NEC sales
representative.
The values contained in this document were obtained under certain testing conditions at NEC. They are not
guaranteed and are for reference only.
If caulking or welding, be careful to keep the resistance value of the connecting section low.
If the connecting section has a high resistance value, the passing current may generate an abnormally high
temperature that will cause the thermal cutoff to operate (break the circuit).
It is recommended that the connecting position at the lead of resign-sealed side should be 5 mm or more from
the body of the thermal cutoff.
After mounting the thermal cutoff, be careful not to apply force that may pull, push or twist the lead wires.
Be careful when mounting the thermal cutoff because external force, heat, or a harmful atmosphere (contain-
ing excessive humidity or sulfurous acid gas) may damage the characteristics of the thermal cutoff. If appli-
cable, it is recommended to warn general consumers who are not aware of the usage cautions for the thermal
cutoff not to mount, remove or replace the thermal cutoff through a note to this effect in the user's manual and
other related material.
5 mm or more
5 mm or more
Position of installation
SM/G SERIES
7