irm-h638t-tr2 Everlight Electronics Co., Ltd., irm-h638t-tr2 Datasheet - Page 8

• Manufacturer Part Number: irm-h638t-tr2
• Description: Infrared Remote-control Receiver Module
• Manufacturer: Everlight Electronics Co., Ltd.

Reliability Test Item And Condition
Reflow Terms: JEDEC Level 4 Specification
Note:
1. Not sooner than 15 minutes and not longer than 4 hours after removal from the
2. The time between reflow shall be 5 minutes minimum and 60 minutes maximum.
Recommended method of storage
moisture absorption. The following conditions should be observed, if dry boxes are not available:
Reflow soldering:
under the following condition:
ESD Precaution
the devices especially when they are removed from the Anti-static bag. Electro-Static Sensitive
Devices warning labels are on the packing.
The reliability of products shall be satisfied with items listed below.
Confidence level：90%
LTPD：10%
Everlight Electronics Co., Ltd.
Device No：DMO-0000008
temperature/humidity chamber.
Drying; Temp.:125℃ 24hrs
10sec, 3 times
After more than 72 hours under these conditions moisture content will be too high for
In case of moisture absorption, the devices will recover to former condition by drying
Proper storage and handing procedures should be followed to prevent ESD damage to
Dry box storage is recommended as soon as the aluminum bag has been opened prevent
192 hours at 40℃+5℃/-0℃ and 5%RH (dry air / nitrogen) or
96 hours at 60℃+5℃ and < 5%RH for all device containers or
24 hours at 125℃+5℃ not suitable for reel or tubes.
Storage temperature 10℃ to 30℃
Storage humidity ≦60%RH max.
EVERLIGHT ELECTRONICS CO.,LTD.
Moisture 30℃ / 60% RH 96hrs
http:\\www.everlight.com
Prepared date：09 -26-2007
Rev 1
Reflow Temp.: 260℃±5℃
IRM-H6XXT/TR2
Prepared by：IBU_NPID2
Page: 8 of 9