c150kgct HB Electronic Components, c150kgct Datasheet - Page 8

• Manufacturer Part Number: c150kgct
• Description: Hebeiltd Led Specification
• Manufacturer: HB Electronic Components

1.Application Limitation :
2.Storage :
3.Soldering
DRAWING NO. : DS-71-03-0005
Bin Code List
CAUTIONS
Do not apply any stress to the lead frame during soldering while the LED is at high temperature.
Recommended soldering condition.
Reflow Soldering :
Pre-heat 120~150°C, 120sec. MAX., Peak temperature : 240°C Max. Soldering time : 10 sec Max.
Soldering Iron : (Not recommended)
Before opening the package :
After opening the package :
Temperature 300°C Max., Soldering time : 3 sec. Max.(one time only), power dissipation of iron : 20W Max. use
SN60 solder of solder with silver content and don’t to touch LED lens when soldering.
The LED’s described here are intended to be used for ordinary electronic equipment (such as office equipment,
communication equipment and household application).Consult PARA’s sales in advance for information on
application in which exceptional quality and reliability are required, particularly when the failure or malfunction of
the LED’s may directly jeopardize life or health (such as airplanes, automobiles, traffic control equipment, life
support system and safety devices).
The LEDs should be kept at 5°C to 30°C or less and 85%RH or less. The LEDs should be used within a year.
The LEDs should be kept at 5°C to 30°C or less and 70%RH or less. The LEDs should be soldered within 168
hours(7 days) after opening the package.
Please avoid rapid transitions in ambient temperature in high humidity environments where condensation may occur.
Luminous Intensity(IV), Unit:mcd@20mA
Bin Code
M
N
P
Including test tolerance
Bin Code
16.0
25.0
40.0
Min
GA
GB
SURFACE MOUNT DEVICE LED
Dominant Wavelength (Hue),Unit: nm@20mA
Part No. : L-C150KGCT
Including±1nm test tolerance
Max
32.0
50.0
80.0
566.0
569.0
Min
DATE : 2004-06-07
Bin Code
Forward Voltage(VF), Unit:V@20mA
4
5
6
7
Including test tolerance
571.0
574.0
Max
Min
1.85
1.95
2.05
2.15
PAGE 8
Max
REV:A / 03
2.05
2.15
2.25
2.35