tda9861 NXP Semiconductors, tda9861 Datasheet - Page 18

• Manufacturer Part Number: tda9861
• Description: Universal Hifi Audio Processor For Tv
• Manufacturer: NXP Semiconductors

Philips Semiconductors
SOLDERING
Plastic dual in-line packages
B
The maximum permissible temperature of the solder is 260 C; this temperature must not be in contact with the joint for
more than 5 s. The total contact time of successive solder waves must not exceed 5 s.
The device may be mounted up to the seating plane, but the temperature of the plastic body must not exceed the
specified storage maximum. If the printed-circuit board has been preheated, forced cooling may be necessary
immediately after soldering to keep the temperature within the permissible limit.
R
Apply the soldering iron below the seating plane (or not more than 2 mm above it). If its temperature is below 300 C it
must not be in contact for more than 10 s; if between 300 and 400 C, for not more than 5 s.
DEFINITIONS
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices, or systems where malfunction of these
products can reasonably be expected to result in personal injury. Philips customers using or selling these products for
use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such
improper use or sale.
PURCHASE OF PHILIPS I
June 1994
Data sheet status
Objective specification
Preliminary specification
Product specification
Limiting values
Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or
more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation
of the device at these or at any other conditions above those given in the Characteristics sections of this specification
is not implied. Exposure to limiting values for extended periods may affect device reliability
Application information
Where application information is given, it is advisory and does not form part of the specification.
Y DIP OR WAVE
EPAIRING SOLDERED JOINTS
Universal HiFi audio processor for TV
Purchase of Philips I
components in the I
Philips. This specification can be ordered using the code 9398 393 40011.
2
C COMPONENTS
This data sheet contains target or goal specifications for product development.
This data sheet contains preliminary data; supplementary data may be published later.
This data sheet contains final product specifications.
2
C system provided the system conforms to the I
2
C components conveys a license under the Philips’ I
18
2
C specification defined by
Preliminary specification
2
C patent to use the
TDA9861