v23836-c18-r363 Finisar Corporation., v23836-c18-r363 Datasheet - Page 11

• Manufacturer Part Number: v23836-c18-r363
• Description: Product Specification 1x9 Rohs Compliant Transceiver With Duplex Sc Receptacle Single Mode 1310 Nm 21 Km Sonet Oc-3/sdh Stm-1
• Manufacturer: Finisar Corporation.

V23836-C18-R363 Product Specification – October 2006
This application note assumes Fiber Optic transceivers using 3.3V power supply and
SerDes Chips using either 3.3V or 5V power supply. It also assumes no self biasing at the
receiver data inputs (RD+/RD–) of the SerDes chip (Refer to the manufacturer Product
Specification for other applications).
Value of R1...R4 may vary as long as proper 50Ω termination to VEE or 100Ω
differential is provided. The power supply filtering is required for good EMI
performance. Use short tracks from the inductor L1/L2 to the module V
Rx/V
Tx.
CC
CC
Further application notes for electrical interfacing are available upon request. Ask for
Appnote 82.
We strongly recommend a V
plane under the module for getting good EMI
EE
performance.
The transceiver contains an automatic shutdown circuit. Reset is only possible if the
power is turned off, and then on again. (V
Tx switched below V
).
CC
TH
© Finisar Corporation October 2006 Rev. A Preliminary Data
11