tda5235 Infineon Technologies Corporation, tda5235 Datasheet - Page 77

• Manufacturer Part Number: tda5235
• Description: Enhanced Sensitivity Double-configuration Receiver With Digital Baseband Processing
• Manufacturer: Infineon Technologies Corporation

Chapter 2.5.2
accompanied by information which contains the status of the respective receive
operation. Note that the availability of received data packets is communicated via alerts
in the control interface.
Figure 46
Packet Oriented Transparent Payload Mode (POTP)
This mode is very similar to POF Mode as data which is going into FIFO is also available
via RXD and RXSTR signals (see
Figure 47
In the TDA5235, there are specific digital output lines (PPx pin) for the Bi-phase decoded
data and an appropriate Strobe signal. During inactivity of the receiver, the line is in
default mode switched to low.
Data Sheet
Data interface for the Packet Oriented FIFO Mode
Data interface for the Packet Oriented Transparent Payload Mode
and
synchronizer
synchronizer
line decoder
line decoder
Chapter
bit
bit
scheduler
scheduler
2.5.5. The data which is read from the RX FIFO is
Chapter 2.5.3 Digital Output
framer
framer
77
TDA5235
TDA5235
RX FIFO
RX FIFO
Functional Description
Pins).
interface
interface
RX data
RX data
Strobe
V1.0, 2010-02-19
data
data
TDA5235