w83627hg Winbond Electronics Corp America, w83627hg Datasheet - Page 45

• Manufacturer Part Number: w83627hg
• Description: Winbond Lpc I/o
• Manufacturer: Winbond Electronics Corp America

7.6
The W83627HF OVT# signal is only related to temperature sensor 2 and 3°VTIN2 / VTIN3±. They
have two modesš
°1±Comparator Modeš
°2±Interrupt Modeš
Setting Bank1/2 CR[52h] bit 2 to 0 will set OVT# signal to comparator mode. Temperature ex-
ceeding TO causes the OVT# output activated until the temperature is less than THYST.°See
Figure 8.12±
Setting Bank1/2 CR[52h] bit 2 to 1 will set OVT# signal to interrupt mode. Setting Temperature
exceeding TO causes the OVT# output activated indefinitely until reset by reading temperature
sensor 2 or sensor 3 registers. Temperature exceeding TO , then OVT# reset, and then tempera-
ture going below THYST will also cause the OVT# activated indefinitely until reset by reading
temperature sensor2 or sensor 3 registers. Once the OVT# is activated by exceeding TO, then
reset, if the temperature remains above THYST, the OVT# will not be activated again.°See Fig-
ure 8.12±
OVT# interrupt mode
Figure. 8.12 OVT# Interrupt Mode
- 41 -
W83627HF/ F/ HG/ G
Publication Release Date: June 09, 2006
Revision 2.27