W83627G Winbond Electronics Corp America, W83627G Datasheet - Page 103

• Manufacturer Part Number: W83627G
• Description: LPC Interface I/O plus Game Port, MIDI Port, Pb-free package
• Manufacturer: Winbond Electronics Corp America

CRF3 （Default 0x00）
CRF4 （Reserved）
CRF5 （PLED mode register. Default 0x00）
CRF6 （Default 0x00）
This register is reserved..
Watch Dog Timer Time-out value. Writing a non-zero value to this register causes the
counter to load the value to Watch Dog Counter and start counting down. If the Bit 7 and Bit 6
are set, any Mouse Interrupt or Keyboard Interrupt event will also cause the reload of previ-
ously-loaded non-zero value to Watch Dog Counter and start counting down. Reading this
register returns current value in Watch Dog Counter instead of Watch Dog Timer Time-out
value.
7 - 4
3 - 0
7 - 6
5 - 4
1 - 0
7 - 0
BIT
BIT
BIT
3
2
These bits select IRQ resource for IRQIN1.
These bits select IRQ resource for IRQIN0.
0x00 Time-out Disable
0x01 Time-out occurs after 1 sec / min
0x02 Time-out occurs after 2 sec / min
0x03 Time-out occurs after 3 sec / min
0xFF Time-out occurs after 255 sec / min
PLED mode select
00： Power LED pin is tri-stated.
01： Power LED pin is drived low.
10： Power LED pin is a 1Hz toggle pulse with 50 duty cycle
11： Power LED pin is a 1/4Hz toggle pulse with 50 duty cycle.
Reserved
WDTO count mode select
0： Second
1： Minute
Enable the rising edge of keyboard Reset（P20）to force Time-out event.
0： Disable
1： Enable
Reserved
.
.
.
.
- 99 -
DESCRIPTION
DESCRIPTION
DESCRIPTION
W83627HF/ F/ HG/ G
Publication Release Date: June 09, 2006
Revision 2.27