emc1413 Standard Microsystems Corp., emc1413 Datasheet - Page 50

• Manufacturer Part Number: emc1413
• Description: 1?c Temperature Sensor With Beta Compensation And Selectable Address
• Manufacturer: Standard Microsystems Corp.

Chapter 9 Revision History
Revision 1.37 (12-23-09)
REVISION LEVEL & DATE
Rev. 1.34 (12-02-08)
(12-23-09)
(05-06-09)
Rev. 1.37
Rev. 1.35
Section 6.21, "Revision
Register (FFh)"
Ordering Information
Table 3.1, "Absolute
Maximum Ratings"
Table 2.1, "EMC1413 and
EMC1414 Pin Description"
Table 3.1, "Absolute
Maximum Ratings"
Table 3.2, "Electrical
Specifications"
Ordering Information and
Table 1.1, "Part Selection"
Figure 8.2, "10 Pin DFN
Package Drawing"
Initial document creation
SECTION/FIGURE/ENTRY
Table 9.1 Customer Revision History
DATASHEET
1°C Temperature Sensor with Beta Compensation and Selectable Address
50
Changed default from 01h to 03h to match the
actual value.
Added EMC1414-A-AIA-TR in a 10-pin DFN
Updated voltage on 5V tolerant pins with pull up
from -0.3 to 3.6 to 0 to 3.6.
Identified 5V tolerant pins. Added the following
application note below table: “For the 5V tolerant
pins that have a pull-up resistor (SMCLK,
SMDATA, THERM, ALERT), the voltage difference
between VDD and the pull-up voltage must never
exceed 3.6V.”
Updated voltage limits for 5V tolerant pins with
pull-up resistors.
Added the following note below table: “For the 5V
tolerant pins that have a pull-up resistor (SMCLK,
SMDATA, THERM, ALERT), the pull-up voltage
must not exceed 3.6V when the device is
unpowered.”
Added leakage current
Added EMC1414-3 and EMC1413-3
Updated figures for package
CORRECTION
SMSC EMC1413 / EMC1414
Datasheet