w83795g Winbond Electronics Corp America, w83795g Datasheet - Page 43

• Manufacturer Part Number: w83795g
• Description: Nuvoton H/w Monitor
• Manufacturer: Winbond Electronics Corp America

Location: Bank 0 Address 0E
Type: Read / Write
Reset: 3VSB Rising.
Default Value: 00
8.4.1.4.
Location: Bank 0 Address 0F
Type: Read / Write
Reset: 3VSB Rising.
Timeout Time is unit in minutes. 0 represents time is up or the timer is cleared. 1 represents there is still
1 minute time for this timer. Similarly, 2 means there is still 2 minutes left.
The second time will automatically be reset to 0 second when Timeout Time register is set.
8.5
Default Value: 00
BIT
7-4
3-2
BIT
7-0
1
0
Voltage/Temperature/FANIN Reading Registers
3VDD Rising @ RST_VDD_MD (CR01.Bit5) set,
SYSRSTIN# Falling @ SYSRST_MD (CR01.Bit6) set.
Init Reset (CR01.Bit7) is set,
Init Reset (CR01.Bit7) is set,
3VDD Rising @ RST_VDD_MD (CR01.Bit5) set,
SYSRSTIN# Falling @ SYSRST_MD (CR01.Bit6) set.
Watch Dog Timer Register (WDT TIMER)
Reserved.
WDT_ST.
These 2 bits record last WDT stage for BIOS readout. The information is used to help
BIOS to identify WDT timeout issuance.
HARD_TO.
1 = A hard timeout occurs. This bit will be cleared after reading.
SOFT_TO.
1 = A soft timeout occurs. This bit will be cleared after reading.
WDT TIMER – Timeout timer
To write 00
To set Timeout Time for SOFT Watch Dog Timer, the unit is minute.
HEX
HEX
HEX
can disable the timer while in Hard Watch Dog Timer mode.
HEX
HEX
- 43 –
DESCRIPTION
DESCRIPTION
W83795G/ADG
Revision 1.41
Aug/2/2010