lpc2361 NXP Semiconductors, lpc2361 Datasheet - Page 21

• Manufacturer Part Number: lpc2361
• Description: Single-chip 16-bit/32-bit Mcu; Up To 128 Kb ?ash With Isp/iap, Ethernet, Usb 2.0 Device/host/otg, Can, And 10-bit Adc/dac
• Manufacturer: NXP Semiconductors

NXP Semiconductors
LPC2361_62_3
Product data sheet
7.11.1 Features
7.12.1 Features
7.13.1 Features
7.12 10-bit ADC
7.13 10-bit DAC
7.14 UARTs
The LPC2361/62 contain one ADC. It is a single 10-bit successive approximation ADC
with six channels.
The DAC allows the LPC2361/62 to generate a variable analog output. The maximum
output value of the DAC is V
The LPC2361/62 each contain four UARTs. In addition to standard transmit and receive
data lines, UART1 also provides a full modem control handshake interface.
The UARTs include a fractional baud rate generator. Standard baud rates such as
115200 Bd can be achieved with any crystal frequency above 2 MHz.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Two CAN controllers and buses.
Data rates to 1 Mbit/s on each bus.
32-bit register and RAM access.
Compatible with CAN specification 2.0B, ISO 11898-1 .
Global Acceptance Filter recognizes 11-bit and 29-bit receive identifiers for all CAN
buses.
Acceptance Filter can provide FullCAN-style automatic reception for selected
Standard Identifiers.
FullCAN messages can generate interrupts.
10-bit successive approximation ADC.
Input multiplexing among 6 pins.
Power-down mode.
Measurement range 0 V to V
10-bit conversion time
Burst conversion mode for single or multiple inputs.
Optional conversion on transition of input pin or Timer Match signal.
Individual result registers for each ADC channel to reduce interrupt overhead.
10-bit DAC
Resistor string architecture
Buffered output
Power-down mode
Selectable output drive
Rev. 03 — 11 November 2008
i(VREF)
2.44 s.
i(VREF)
.
.
Single-chip 16-bit/32-bit MCU
LPC2361/62
© NXP B.V. 2008. All rights reserved.
21 of 50