sc16c850svibs NXP Semiconductors, sc16c850svibs Datasheet - Page 13

no-image

sc16c850svibs

Manufacturer Part Number
sc16c850svibs
Description
1.8 V Single Uart, 20 Mbit/s Max. With 128-byte Fifos, Infrared Irda , And Xscale Vlio Bus Interface
Manufacturer
NXP Semiconductors
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
sc16c850svibs//XR16M781IL32-F
Manufacturer:
EXAR/NXP
Quantity:
6 608
NXP Semiconductors
SC16C850SV_1
Product data sheet
6.10 Loopback mode
Table 6.
The internal loopback capability allows on-board diagnostics. In the Loopback mode, the
normal modem interface pins are disconnected and reconfigured for loopback internally
(see
In the Loopback mode, the transmitter output (TX) and the receiver input (RX) are
disconnected from their associated interface pins, and instead are connected together
internally. The CTS, DSR, CD, and RI are disconnected from their normal modem control
inputs pins, and instead are connected internally to RTS, DTR, MCR[3] (OP2) and
MCR[2] (OP1). Loopback test data is entered into the transmit holding register via the
user data bus interface, AD[7:0]. The transmit UART serializes the data and passes the
serial data to the receive UART via the internal loopback connection. The receive UART
converts the serial data back into parallel data that is then made available at the user data
interface AD[7:0]. The user optionally compares the received data to the initial transmitted
data for verifying error-free operation of the UART TX/RX circuits.
In this mode, the receiver and transmitter interrupts are fully operational. The modem
control interrupts are also operational.
Output
baud rate
(bit/s)
38.4 k
57.6 k
115.2 k
Figure
Baud rate generator programming table using a 1.8432 MHz clock with
MCR[7] = 0, SAMPR[1:0] = 00b, and CLKPRE[3:0] = 0
6). MCR[3:0] register bits are used for controlling loopback diagnostic testing.
Single UART with 128-byte FIFOs, IrDA, and XScale VLIO bus interface
Output
16 clock divisor
(decimal)
3
2
1
Rev. 01 — 8 July 2008
Output
16 clock divisor
(hexadecimal)
03
02
01
DLM
program value
(hexadecimal)
00
00
00
SC16C850SV
…continued
© NXP B.V. 2008. All rights reserved.
DLL
program value
(hexadecimal)
03
02
01
13 of 46

Related parts for sc16c850svibs