adld25pc Advanced Digital Logic, Inc., adld25pc Datasheet - Page 6

no-image

adld25pc

Manufacturer Part Number
adld25pc
Description
Highly Complex Computer Motherboard In The Pc/104
Manufacturer
Advanced Digital Logic, Inc.
Datasheet
Chapter: Introduction
1 Introduction
1.1 Important Notes
Please read this manual carefully before you begin installation of this hardware device. To avoid
Electrostatic Discharge (ESD) or transient voltage damage to the board, adhere to the following rules at
all times:
o
o
o
o
As soon as the board is connected to a working power supply, touching the board may result in electrical
shock, even if the board has not been switched on yet. Please also note that the mounting holes for heat
sinks are connected to ground, so when using an externally AC powered device, a substantial ground
plane differential can occur if the external device's AC power supply or cable does not include an earth
ground. This could also result in electrical shock when touching the device and the heat sink
simultaneously.
1.2 Technical Support
Technical support for this product can be obtained in the following ways:
o
o
o
1.3 Warranty
This product is warranted to be free of defects in workmanship and material. ADL Embedded Solutions'
sole obligation under this warranty is to provide replacement parts or repair services at no charge, except
shipping cost. Such defects which appear within 12 months of original shipment of ADL Embedded
Solutions will be covered, provided a written claim for service under warranty is received by ADL
Embedded Solutions no less then 30 days prior to the end of the warranty period of within 30 days of
discovery of the defect – whichever comes first. Warranty coverage is contingent upon proper handling
and operation of the product. Improper use such as unauthorized modifications or repair, operation
outside of specified ratings, or physical damage may void any service claims under warranty.
1.4 Return Authorization
All equipment returned to ADL Embedded Solutions for evaluation, repair, credit return, modification, or
any other reason must be accompanied by a Return Material Authorization (RMA) number. ADL
Embedded Solutions requires a completed RMA request form to be submitted in order to issue an RMA
number. The form can be found under the Support section at our website: www.adl-usa.com or
www.adl-europe.com. Submit the completed form to support@adl-usa.com or fax to +1 858-490-0599 for
the USA office, or to rma@adl-europe.com or fax to +49 (0) 271 250 810 20 to request an RMA from the
European office in Germany. Following a review of the information provided, ADL Embedded Solutions
will issue an RMA number.
page 6
You must discharge your body from electricity before touching this board.
Tools you use must be discharged from electricity as well.
Please ensure that neither the board you want to install, nor the unit on which you want to install this
board, is energized before installation is completed.
Please do not touch any devices or components on the board.
By contacting our support staff at +1 858-490-0597 or +49 (0) 271 250 810 0
By contacting our staff via e-mail at support@adl-usa.com or support@adl-europe.com
Via our website at www.adl-usa.com/support or www.adl-europe.com/support
C
AUTION
ADL Embedded Solutions ADLD25PC
Important Notes

Related parts for adld25pc