hmc543 Hittite Microwave Corporation, hmc543 Datasheet - Page 7
![no-image](/images/no-image-200.jpg)
hmc543
Manufacturer Part Number
hmc543
Description
22.5? 4-bit Digital Phase Shifter Chip, 8 - 12 Ghz
Manufacturer
Hittite Microwave Corporation
Datasheet
1.HMC543.pdf
(8 pages)
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
HMC543
Manufacturer:
HITTITE
Quantity:
5 000
Part Number:
HMC543
Manufacturer:
ADI/亚德诺
Quantity:
20 000
Company:
Part Number:
hmc543LC4B
Manufacturer:
M/A-COM
Quantity:
5 000
Part Number:
hmc543LC4B
Manufacturer:
ADI/亚德诺
Quantity:
20 000
Company:
Part Number:
hmc543LC4BETR
Manufacturer:
HITTITE
Quantity:
12 800
Company:
Part Number:
hmc543LC4BTR
Manufacturer:
ZCOMM
Quantity:
1 400
HMC543
v01.0507
22.5° MMIC 4-BIT DIGITAL
PHASE SHIFTER, 8 - 12 GHz
Assembly Diagram
3
Handling Precautions
Follow these precautions to avoid permanent damage.
Storage: All bare die are placed in either Waffle or Gel based ESD protective containers, and then sealed in an ESD protective bag
for shipment. Once the sealed ESD protective bag has been opened, all die should be stored in a dry nitrogen environment.
Cleanliness: Handle the chips in a clean environment. DO NOT attempt to clean the chip using liquid cleaning systems.
Static Sensitivity: Follow ESD precautions to protect against > ± 250V ESD strikes.
Transients: Suppress instrument and bias supply transients while bias is applied. Use shielded signal and bias cables to minimize
inductive pick-up.
General Handling: Handle the chip along the edges with a vacuum collet or with a sharp pair of bent tweezers. The surface of the
chip has fragile air bridges and should not be touched with vacuum collet, tweezers, or fi ngers.
Mounting
The chip is back-metallized and can be die mounted with electrically conductive epoxy. The mounting surface should be clean
and fl at.
Epoxy Die Attach: Apply a minimum amount of epoxy to the mounting surface so that a thin epoxy fi llet is observed around the
perimeter of the chip once it is placed into position. Cure epoxy per the manufacturer’s schedule.
Wire Bonding
Ball or wedge bond with 0.025mm (1 mil) diameter pure gold wire. Thermosonic wirebonding with a nominal stage temperature of
150 deg. C and a ball bonding force of 40 to 50 grams or wedge bonding force of 18 to 22 grams is recommended. Use the minimum
level of ultrasonic energy to achieve reliable wirebonds. Wirebonds should be started on the chip and terminated on the package or
substrate. All bonds should be as short as possible <0.31mm (12 mils).
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
3 - 14
Order On-line at www.hittite.com