hmc581lp6 Hittite Microwave Corporation, hmc581lp6 Datasheet - Page 6

• Manufacturer Part Number: hmc581lp6
• Description: High Ip3 Dual Channel Downconverter Smt, 0.8 - 0.96 Ghz
• Manufacturer: Hittite Microwave Corporation

Pin Descriptions
14, 16, 18, 20, 22,
2, 4, 6, 8, 10, 12,
Pin Number
24, 26, 28
5, 15, 19
11, 25
13, 23
9, 27
1, 7
17
21
3
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
RF1, RF2
AMP IF2,
Function
MIX IF2,
AMP IF1
MIX IF1
IF2, IF1
Vdd LO
GND
Vdd
N/C
LO
ing capacitor are required between mixer IF port and IF
These pins are DC coupled and matched to 50 Ohms.
Inputs to the IF amplifi ers. A low pass fi lter and block-
the mixer. A low pass fi lter and blocking capacitor are
Backside of package has exposed metal ground slug
Power supply for the second stage LO amplifi er. One
No connection. These pins may be connected to RF
IF output from the mixers. This pin is DC coupled to
Outputs of the IF amplifi ers and bias ports for the IF
Bias voltage for the fi rst stage of the LO amplifi er. A
pull up inductor, resistor, and bypass capacitors are
amplifi ers. A pull up inductor, resistor, and bypass
This pin is AC coupled and matched to 50 Ohms.
capacitors are required. (See application circuit).
external bypass capacitor (1,000 pF) is required.
required between mixer IF port and IF amplifi er.
v00.0806
ground. Performance will not be affected.
that must also be connected to ground.
IF1 = 71 mA typical, 85 mA maximum.
IF2 = 71 mA typical, 85 mA maximum.
Order On-line at www.hittite.com
amplifi er. (See application circuit).
required. (See application circuit).
61 mA typical, 73 mA maximum.
53 mA typical, 64 mA maximum.
(See application circuit).
Description
DOWNCONVERTER, 800 - 960 MHz
HMC581LP6
HIGH IP3 RFIC DUAL
Interface Schematic
/
581LP6E
8 - 189
8